Description
BG18 Series Bar graph Indicators can be mounted either vertically or horizontally and provide a dynamic analogue display of any type of process parameter that can be transmitted to the indicator via process voltage or current input. BG18 Series indicators have large, bright, 30-segment LED bargraph displays with a scale length of 75mm that are particularly well suited for applications where readings must be taken at a distance. Electrical connections are via plug-in screw terminal blocks.
Specifications
Offset and Span: adjustable by trimmers
Alarms: BG18-3 has dual setpoints adjustable high or low
BG18-3 Alarm Relay: One SPDT relay for each set point rated 2 A @ 250 Vac
Bargraph Display: 30-segment LED, 75 mm scale length
Power:
BG18-1 and BG18-3: 115 or 230 Vac (Specifiy); 15-30 Vdc optional. Consumption: 6VA
BG18-4 and BG18-5: 16-30 Vdc, non-isolated. Consumption: 140mA
Mounting: Numbers on lens are orientated for vertical reading as shown above, but can also be read when mounted horizontaly
Case: Black ABS plastic, DIN 43700
Dimensions: BG18-1, BG18-3: 96 x 48 x 117 mm; BG18-4, BG18-5: 96 x 24 x 70 mm
Panel Cutout: BG18-1, BG18-3: 44.5 x 92.5 mm; BG18-4, BG18-5: 21.5 x 92.5 mm
† All amounts shown in EUR, GBP, or USD
Note: Standard power supply for BG18-4 and BG18-5 is 16 to 30 Vdc non-isolated.
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Type select from:-1 for 1/8 DIN
-3 for 1/8 DIN with dual setpoints
-4 for 96 x 24mm left hand zero
-5 for 96 x 24mm centre zero
(2)
Input Range select from:-P1 for 0 to 100 mVdc
-P2 for 0 to 1 Vdc
-P3 for 0 to 10 Vdc
-P4 for 0 to 100 Vdc
-P5 for 0 to 1 mAdc
-P6 for 0 to 20 mAdc
-P7 for 4 to 20 mAdc
(3)
Power (BG18-1 & -3 only) select from: Nothing(leave field blank) for 115 Vac 50/60 Hz
-220 for 230 Vac 50/60 Hz
-15/30 for 15 to 30 Vdc isolated
Note: All combinations may not be valid, check spec sheet for valid part numbers.
CLOSE
