1/8 & 1/4 DIN Temperature/Process Controllers with Adaptive Tuning and Modular Output and Communications Options

CN1611 & CN1621 Series

PLACE ORDER

Universal Input: Thermocouple, RTD, Current & Voltage
Adaptive Auto tuning
Bumpless Auto/Manual Operation
Ramp to Setpoint
Dual Display
1.0°or 0.1° Resolution
3 Output Capability
Universal Power: 90 to 264 Vac
NEMA-4 (IP65) Front Panel Standard
Configuration Port

Optional Features
Plug-in Output Modules (for Outputs 2 & 3)
Low Voltage Power: 25 to 50 Vac/22 to 65 Vdc
24 Vdc Transmitter Power Supply
RS-485 Communications
Software and Cable for the Configuration Port
Analog Retransmission Output

Description

Easy programming and operational simplicity are the mainstays of the entire CN1600 Series. The adaptive autotune feature provides better overall control with accurate hands-free tuning and tighter control while minimizing over-shoot. The CN1600 Series offers a choice of full PID, Heat-Cool, or On-Off control with up to two alarms. This allows the CN1600 Series to handle virtually any application. Its unique loop break alarm provides process loop problem identification without the need for the additional external hardware required by “heater break protection” controllers. The CN1611 and CN1621 Series feature a 24 Vdc transmitter power supply. They also have a configuration port that allows them to be programmed off-line from a PC or laptop computer. This feature offers faster configuration of multiple units along with the ability to store programming on disk for future reference.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
For complete product specifications see the Related Links section at the bottom of this page.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

BD1600-R

Consult Sales

Availability:

2 A relay output

BD1600-DC

Consult Sales

Availability:

dc pulse output

BD1600-F

Consult Sales

Availability:

Analog output

BD1600-C4

Consult Sales

Availability:

RS-485 communications

† All amounts shown in EUR, GBP, or USD
Note: * For configuration only through configuration port; not used with RS-485 communications. Optional Plug-in Boards.
Each of the above cards occupies one card slot in the unit. Only one transmitter power supply can be purchased per unit. Reprogramming of controller is necessary when installing plug-in boards.

Part Number Builder

Build Your Part Number Below

(1)	(2)	(3)	(4)

Option Descriptions:

(1) Temperature/Process Controllers select from:
CN1611- for 1/8 DIN controller
CN1621- for 1/4 DIN controller

(2) Output 1 select from:
DC1 for Single dc pulse
F1 for Single analog
R1 for 2 amp relay

(3) Output 2 select from:
Nothing(leave field blank) for Unit with output 1
-DC2 for dc pulse
-F2 for analog
-R2 for 2 amp relay

(4) Output 3 select from:
Nothing(leave field blank) for Unit with output 1 and 2
-R3 for 2 amp relay
-R3-C4 for 2 amp relay and RS-485 communications
-C4 for RS-485 communications

Note: All combinations may not be valid, check spec sheet for valid part numbers.