i-Series 1/32, 1/16, 1/8 DIN Programmable Temperature/Process Controllers with RS-232 & RS-485 Communications.

CNi Series Family

^£276.04 CNi3222

PLACE ORDER

3-Colour, 4-Digit Displays
User Friendly, Simple to Configure
High Quality! 5-Year Warranty Std.
Selectable Full Autotune PID Control
High Accuracy:
±0.5°C, 0.03% Reading
Built-in 24 Vdc Excitation, Standard on units without DC power or communication options
IP65 (NEMA 4) Front Panel
Temperature Stability ±0.04°C/°C RTD and ±0.05°C/°C TC @ 25°C
2 Outputs: Control, Alarm, or Retransmission of Process Variable.
Universal Inputs: Thermocouple, RTD, Process Voltage/Current

Temperature and Process Controllers and Power Switching Devices - View related products

Description

*For our newest range of meters and controllers with Modbus connectivity, expanded ramp and soak programs, universal inputs, and simple PC set-up, visit our Platinum Series.*

The OMEGA™ iSeries is a family of microprocessor-based instruments offered in three true DIN sizes with NEMA 4 (IP65) rated front bezels. All of the instruments share the same set-up and configuration menu and method of operation, a tremendous time saver for integration of a large system. The iSeries family includes extremely accurate digital panel meters "DPi" and single loop PID controllers "CNi" that are simple to configure and use, while providing tremendous versatility and a wealth of powerful features.

The CNi Series covers a broad selection of transducer and transmitter inputs with 2 input models.

The universal temperature and process instrument (CNi models) handles 10 common types of thermocouples, multiple RTDs and several process (DC) voltage and current ranges. This model also features built-in excitation, 24 Vdc @ 25 mA. With its wide choice of signal inputs, this model is an excellent choice for measuring or controlling temperature with a thermocouple, RTD, or 4 to 20 mA transmitter.

The strain and process instruments (CNiS models) measure inputs from load cells, pressure transducers, and most any strain gage sensor as well as process voltage and current ranges. The CNiS has built-in 5 or 10 Vdc excitation for bridge transducers, 5 Vdc @ 40 mA or 10 Vdc @ 60 mA (any excitation voltage between 5 and 24 Vdc is available by special order). This CNiS model supports 4- and 6-wire bridge communications, ratiometric measurements. The CNiS features fast and easy "in process" calibration/ scaling of the signal inputs to any engineering units. This model also features 10-point linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds.

Programmable colour Display
The iSeries are 1/8, 1/16 and 1/32 DIN controllers featuring the big iSeries colour-changing display. The digits are twice the size of typical 1/8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change colour between GREEN, AMBER, and RED.

Embedded Internet and Serial Communications
Featuring optional "embedded Internet" (specify "-EIT" option) the iSeries are the first instruments of their kind that connect directly to an Ethernet network and transmit data in standard TCP/ IP packets, or even serve Web pages over a LAN or the Internet. The iSeries are also available with serial communications. With the "-C24" option, the user can select from the pushbutton menu between RS232, RS422, and RS485, with straightforward ASCII commands or MODBUS.

SPECIFICATIONS

Universal Temperature and Process Input (DPi/CNi Models)
Accuracy: ±0.5°C temp; 0.03% rdg
Resolution: 1°/0.1° 10 µV process
Temperature Stability:
    RTD: 0.04°C/°C
    TC @ 25°C (77°F): 0.05°C/°C
    Cold Junction Compensation
    Process: 50 ppm/°C
NMRR: 60 dB
CMRR: 120 dB
A/D Conversion: Dual slope
Reading Rate: 3 samples/s
Digital Filter: Programmable
Display: 4-digit 9-segment LED 10.2 mm; DPi/CNi32, DPi/CNi16, DPi/CNi16D, DPi/CNi8DV 21 mm; DPi/CNi8 10.2 mm and 21 mm; DPi/CNi8DH RED, GREEN, and AMBER programmable colours for process variable, setpoint and temperature units
Input Types: Thermocouple, RTD, analogue voltage, analogue current
Thermocouple Lead Resistance: 100 Ω max
Thermocouple Types (ITS 90): J, K, T, E, R, S, B, C, N, L (J DIN)
RTD Input (ITS 68): 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385 or 0.00392 curve
Voltage Input: 0 to 100 mV, 0 to 1V, 0 to 10 Vdc
Input Impedance: 10 MΩ for 100 mV 1 MΩ for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load)
Configuration: Single-ended
Polarity: Unipolar
Step Response: 0.7 sec for 99.9%
Decimal Selection:
    Temperature: None, 0.1
    Process: None, 0.1, 0.01 or 0.001
Setpoint Adjustment: -1999 to 9999 counts
Span Adjustment: 0.001 to 9999 counts
Offset Adjustment: -1999 to 9999
Excitation (Not Included with
Communication): 24 Vdc @ 25 mA (not available for low-power option)

Universal Strain and Process Input (DPiS/CNiS Models)
Accuracy: 0.03% reading
Resolution: 10/1µV
Temperature Stability: 50 ppm/°C
NMRR: 60 dB
CMRR: 120 dB
A/D Conversion: Dual slope
Reading Rate: 3 samples/s
Digital Filter: Programmable
Input Types: analogue voltage and current
Voltage Input: 0 to 100 mVdc, -100 mVdc to 1 Vdc, 0 to 10 Vdc
Input Impedance: 10 MΩ for 100 mV; 1 MΩ for 1V or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load)
Linearization Points: Up to 10
Configuration: Single-ended
Polarity: Unipolar
Step Response: 0.7 sec for 99.9%
Decimal Selection: None, 0.1, 0.01 or 0.001
Setpoint Adjustment: -1999 to 9999 counts
Span Adjustment: 0.001 to 9999 counts
Offset Adjustment: -1999 to 9999
Excitation (Optional In Place Of Communication): 5 Vdc @ 40 mA; 10 Vdc @ 60 mA

Control
Action: Reverse (heat) or direct (cool)
Modes: Time and amplitude proportional control; selectable manual or auto PID, proportional, proportional with integral, proportional with derivative and anti-reset Windup, and on/off
Rate: 0 to 399.9 s
Reset: 0 to 3999 s
Cycle Time: 1 to 199 s; set to 0 for on/off
Gain: 0.5 to 100% of span; setpoints 1 or 2
Damping: 0000 to 0008
Soak: 00.00 to 99.59 (HH:MM), or OFF
Ramp to Setpoint:
00.00 to 99.59 (HH:MM), or OFF
Auto Tune: Operator initiated from front panel

Control Output 1 and 2
Relay: 250 Vac or 30 Vdc @ 3 A (resistive load); configurable for on/off, PID and ramp and soak
Output 1: SPDT, can be configured as alarm 1 output
Output 2: SPDT, can be configured as alarm 2 output
SSR: 20 to 265 Vac @ 0.05 to 0.5 A (resistive load); continuous
DC Pulse: Non-isolated; 10 Vdc @ 20 mA
analogue Output (Output 1 Only): Non-isolated, proportional 0 to 10 Vdc or 0 to 20 mA; 500 Ω max
Output 3 Retransmission
    Isolated analogue Voltage and Current
    Current: 10 V max @ 20 mA output
    Voltage: 20 mA max for 0 to 10 V output

Network and Communications
Ethernet: Standards compliance IEEE 802.3 10 Base-T
Supported Protocols: TCP/IP, ARP
RS232/RS422/RS485: Selectable from menu; both ASCII and Modbus protocol selectable from menu; programmable 300 to 19.2 Kb; complete programmable setup capability; program to transmit current display, alarm status, min/max, actual measured input value and status
RS485: Addressable from 0 to 199
Connection: Screw terminals

Alarm 1 and 2 (Programmable)
Type: Same as output 1 and 2
Operation: High/low, above/below, band, latch/unlatch, normally open/ normally closed and process/deviation; front panel configurations
analogue Output (Programmable): Non-isolated, retransmission 0 to 10 Vdc or 0 to 20 mA, 500 Ω max (output 1 only); accuracy is ±1% of FS when following conditions are satisfied: input is not scaled below 1% of input FS, analogue output is not scaled below 3% of output FS

General
Power: 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage
Low Voltage Power Option: 24 Vac**, 12 to 36 Vdc for DPi/CNi/DPiS/CNiS; 20 to 36 Vdc for dual display, ethernet, and isolated analogue output from qualified safety approved source

Isolation
Power to Input/Output: 2300 Vac per 1 minute test
For Low Voltage Power Option: 1500 Vac per 1 minute test
Power to Relay/SSR Output: 2300 Vac per 1 minute test
Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test
RS232/485 to Input/Output: 500 Vac per 1 minute test
Environmental Conditions:
    All Models: 0 to 55°C (32 to 131°F) 90% RH non-condensing
    Dual Display Models: 0 to 50°C (32 to 122°F), 90% RH non-condensing (for UL only)
Protection:
    DPi/CNi/DPiS/CNiS32, 16, 16D, 8C: NEMA 4X/Type 4 (IP65) front bezel
    DPi/CNi8, 8DH, 8DV: NEMA 1/Type 1 front bezel
    Approvals: UL, C-UL, CE per EN61010- 1:2001
Dimensions
    DPi/CNi8 Series: 48 H x 96 W x 127 mm D (1.89 x 3.78 x 5")
    DPi/CNi16 Series: 48 H x 48 W x 127 mm D (1.89 x 1.89 x 5")
    DPi/CNi32 Series: 25.4 H x 48 W x 127 mm D (1.0 x 1.89 x 5")
Panel Cutout
    DPi/CNi8 Series: 45 H x 92 mm W (1.772 x 3.622"), 1.8 DIN
    DPi/CNi16 Series: 45 mm (1.772") square, 1.16 DIN
    DPi/CNi32 Series: 22.5 H x 45 mm W (0.886 x 1.772"), 1.32 DIN
Weight
    DPi/CNi8 Series: 295 g (0.65 lb)
    DPi/CNi16 Series: 159 g (0.35 lb)
    DPi/CNi32 Series: 127 g (0.28 lb)
* No CE compliance above 60 Hz.
** Units can be powered safely with 24 Vac power, but no certification for CE/UL are claimed.

THERMOCOUPLE CHART

Universal Temperature / Process
Input Type		Range	Accuracy
Process Voltage		0 to 100 mV, 0 to 1 V, 0 to 10 Vdc	0.03% rdg
Process Current		0 to 20 mA (4 to 20 mA)	0.03% rdg
Excitation		24 V @ 25 mA
J	Iron-Constantan	-210 to 760°C / -346 to 1400°F	0.4°C / 0.7°F
K	CHROMEGA™-ALOMEGA™	-270 to -160°C / -160 to 1372°C -454 to -256°F / -256 to 2502°F	1.0°C / 0.4°C 1.8°F / 0.7°F
T	Copper-Constantan	-270 to -190°C / -190 to 400°C -454 to -310°F / -310 to 752°F	1.0°C / 0.4°C 1.8°F / 0.7°F
E	CHROMEGA™-Constantan	-270 to -220°C / -220 to 1000°C -454 to -364°F / -364 to 1832°F	1.0°C / 0.4°C 1.8°F / 0.7°F
R	Pt/13%Rh-Pt	-50 to 40°C / 40 to 1768°C -58 to 104°F / 104 to 3214°F	1.0°C / 0.5°C 1.8°F / 0.9°F
S	Pt/10%Rh-Pt	-50 to 100°C / 100 to 1768°C -58 to 212°F / 212 to 3214°F	1.0°C / 0.5°C 1.8°F / 0.9°F
B	30%Rh-Pt/6%Rh-Pt	100 to 640°C / 640 to 1820°C 212 to 1184°F / 1184 to 3308°F	1.0°C / 0.5°C 1.8°F / 0.9°F
C	5%Re-W/26%Re-W	0 to 2320°C / 32 to 4208°F	0.4°C / 0.7°F
N	Nicrosil-Nisil	-250 to -100°C / -100 to 1300°C -418 to -148°F / -148 to 2372°F	1.0°C / 0.4°C 1.8°F / 0.7°F
L	J DIN	-200 to 900°C / -328 to 1652°F	0.4°C / 0.7°F
RTD	Pt, 0.00385, 100, 500, 1000 ohm	-200 to 900°C / -328 to 1652°F	0.4°C / 0.7°F
RTD	Pt, 0.00392, 100, 500, 1000 ohm	-200 to 850°C / -328 to 1562°F	0.4°C / 0.7°F

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

1/32 DIN Controllers

CNi3222

£276.04

Availability: 8 weeks

with Two SSR Outputs

CNi3224-C24

£367.98

Availability: 8 weeks

with One SSR and One Pulse Output plus RS-232 and RS-485

CNi3233

£276.04

Availability: In Stock

withTwo Relay Outputs

CNi3243

£281.12

Availability: 3 weeks

with One DC Pulse & One Relay Output

CNi3244-C24-DC

£398.13

Availability: 8 weeks

with Two dc Pulse Outputs plus RS-232 and RS-485. 12 to 36Vdc or 24Vac powered

CNi3252-C24

£367.98

Availability: 8 weeks

with One Analogue and One SSR Output plus RS-232 and RS-485

CNi3253

£281.12

Availability: 2 weeks

with One Analogue and One Relay Output

CNi3253-C24

£361.32

Availability: In Stock

with One Analogue and One Relay Output plus RS-232 & RS-485

1/16 DIN Controllers

CNi16D22-EIT

£432.39

Availability: 8 weeks

Ethernet w/Embedded Web Server, Dual Display, Two SSR

CNi1623

£325.76

Availability: 8 weeks

with One SSR and One Relay Output

CNi16D23-DC

£386.05

Availability: 4 weeks

Dual Display, SSR and relay output. 12 to 36Vdc or 24Vac powered

CNi16D24-C4EIT

£506.09

Availability: 4 weeks

Ethernet w/Embedded Web Server + Isolated RS-485/422, Dual Display, SSR and pulsed 10 Vdc

CNi1633

£325.76

Availability: 3 weeks

withTwo Relay Outputs

CNi1633-C24

£410.18

Availability: 8 weeks

with Two Relay Outputs plus RS-232 & RS-485

CNi16D33

£349.87

Availability: 2 weeks

Dual Display, Two Relay Outputs

CNi16D33-EIT

£432.39

Availability: 3 weeks

Ethernet w/Embedded Web Server , Dual Display, Two Relays Outputs

CNi1643-DC

£351.30

Availability: 8 weeks

with One DC Pulse & One Relay Output. 12 to 36Vdc or 24Vac powered

CNi1643-C24

£404.88

Availability: 8 weeks

with One DC Pulse & One Relay Output plus RS-232 & RS-485

CNi16D44-EIT

£432.40

Availability: 8 weeks

Ethernet w/Embedded Web Server , Dual Display, Two pulsed 10 Vdc

CNi16D53-EIT

£440.35

Availability: 8 weeks

Ethernet w/Embedded Web Server , Dual Display, Analogue Output and Relay

CNi1654-C24-DC

£417.05

Availability: 3 weeks

with One Analogue and One Pulse dc Output plus RS-232 & RS-485. 12 to 36 Vdc or 24 Vac

CNi16D54

£345.34

Availability: 8 weeks

Dual Display ,Analogue output 0 to 10 Vdc and pulse 10Vdc

1/8 DIN Controllers

CNi823

£367.98

Availability: 8 weeks

with One SSR & One Relay Output

CNi833

£361.32

Availability: In Stock

with Two Relay Outputs

CNi833-C24

£444.23

Availability: 8 weeks

with Two Relay Outputs plus RS-232 and RS-485

CNi853

£367.98

Availability: 8 weeks

with One Analogue & One Relay Output

CNi854

£363.20

Availability: 8 weeks

with One Analogue & One DC Pulse Output

† All amounts shown in EUR, GBP, or USD
Note: Refer to the Related Links for CNi32, CNi16 and CNi8 for complete specifications.
Ordering Example: (1) CNI3222-C24 1/32 DIN PID Controller with two solid state relays for PID control and serial communications, both RS-232 and RS-485, £367.98

Part Number Builder

Build Your Part Number Below

(1)	(2)	(3)	(4)	(5)	(6)

Option Descriptions:

(1) Temperature/Process Controllers select from:
CNi32 for Two control outputs 1/32 DIN
CNi16 for Two control outputs 1/16 DIN
CNi16D for Two control outputs with dual display 1/16 DIN
CNi8 for Two control outputs 1/8 DIN
CNi8A for Two control outputs w/Isolated Analogue Retransmission

(2) Control Outputs #1 select from:
2 for Solid State Relay/0.5 A at 120/240 Vac continuous
3 for SPDT Relay
4 for Pulsed 10 Vdc at 20 mA
5 for Analogue Output 0 to 10 Vdc or 0 to 20mA

(3) Control Outputs #2 select from:
2 for Solid State Relay/0.5 A at 120/240 Vac continuous
3 for Relay SPDT 3A at 120/3 A at 240 Vac
4 for Pulsed Driver 10 Vdc at 20 mA /for use with external SSR

(4) Network Options select from:
Nothing(leave field blank) for No Network Options
-EIT for Ethernet with Embedded Internet (not available on 1/32DIN Controller)
-C24 for Isolated RS-232 and RS-485 300 to 19.2 k baud
-C4EIT for Ethernet with Embedded Web Server + Isolated RS-485/422 hub for up to 31 devices(not available on 1/32DIN Controller)

(5) Power Supply select from:
Nothing(leave field blank) for Standard Power (90 to 240 Vac/dc @ 50 to 400 Hz)
-DC for Low Voltage Power (10 to 34 Vac/dc)

(6) Limit Alarm Version(Simplified Menu -No PID Control) select from:
Nothing(leave field blank) for PID control - no limit alarm(standard)
-AL for Limit Alarm Version

Note: All combinations may not be valid, check spec sheet for valid part numbers.