Wall Mount Controller For Temperature, Process or Bridge (Load Cell or Strain) Inputs

CNi8C-EN Series

wall mount process controller

PLACE ORDER

Easy-to-Use Digital Controller with PID and Ramp/Soak
Bright Programmable 3-Colour Changing Display
Universal Inputs: Thermocouple, RTD, Process Voltage or Current, Strain
2 Control or Alarm Outputs, Choice of:
Mechanical Relays
Solid State Relays
Analogue Voltage and Current
IP65 Sealed Enclosure with Input and Output Cable Glands
Fuses for SSR or Relay Outputs
90 to 240 Vac Operation

Controllers - View related products

Description

*Starting from May 1st 2018, CNI8C-EN Series will be discontinued. As a possible substitute, please check out the standard CNi8C Series with the optional DP20-WME wall-mount enclosure.*

The CNi8C-EN is a compact, wall-mountable meter and controller that can be used for applications that need a fixed location, when a control panel is not required. The controller supports a variety of temperature and process, or strain and process inputs. The flip-top enclosure makes programming and wiring access easy.

Specifications
Weight: 1.22 Kg
Dimensions: 206 H x 183 W x 124 mm D
Operating Temperature: 0 to 50°C
Line Voltage/Power:
90-240 Vac ±10%, 50-400 Hz*, 110-375 Vdc equivalent voltage

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with meter/controller, one power input fuse, output fuses as required, power cable (with country specific plug), IP65 cable glands for input and output wiring.

Part Number Builder

Build Your Part Number Below

(1)	(2)	(3)	(4)	(5)
					-EN

Option Descriptions:

(1) Model select from:
CNi8C for Temperature/Process Wall Mount Digital Controller
CNiS8C for Strain/Process Wall Mount Digital Controller

(2) Control Outputs #1 & 2 Direct (Cool) or Reverse (Heat) Acting select from:
22 for Two solid state relays (SSRs) 0.5 A @ 120/240 Vac continuous
23 for SSR and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
33 for 2 Relays Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
52 for Analogue Output selectable as either control or retransmission of process value 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR
53 for Analogue Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay

(3) Network Options select from:
Nothing(leave field blank) for No network option
-C24 for Isolated RS232 and RS485 300 to 19.2 k baud

(4) Power Supply select from:
Nothing(leave field blank) for 110 Vac Power Cable with USA Plug (NEMA 5-15)
-C for 230 Vac Power Cable & Plug used in China (CH1-10)
-E for 230 Vac Power Cable with 2-Pin EU Plug (EU1-16)
-U for 240 Vac Power Cable with 3-Pin UK Plug (UK1-13)

(5) Factory Setup Option select from:
Nothing(leave field blank) for no option
-FS for Factory Setup and Configuration

Note: All combinations may not be valid, check spec sheet for valid part numbers.