Curved Face Ceramic Radiant Heaters 60 x 245 mm (2.36 x 9.65")

CRB

Curved Face Ceramic Radiant Heaters

PLACE ORDER

Standard Solid Curved Face Sizes to Accomodate a Wide Range of New or Existing Applications
Universal Mount Designed to be Dropped into Existing Systems Regardless of Manufacturer
Standard Colors are Metamorphing Rose (Cold) to Grey (Hot), and Traditional White. Optional Colors are Metamorphing Yellow (Cold) to Orange (Hot), and Black
Standard Stocked Voltage: 120 or 220/240V as Noted; Other Voltages are Available
Available with Built-In Type K Thermocouple— Type J Thermocouple and Low Noise Options are Also Available
Long Operating Life—Over 10,000-Plus Hours of Continuous Operation Under Normal Conditions
Performance is Unaffected By Vibration or Adverse Atmospheric Conditions
2.5 to 6 ìm Infrared Radiation Wavelength

Radiant Heaters - View related products

Description

Semi-Finished Series CRB E-Mitters listed to the right are stocked ready for color glazing. Colors available are metamorphing rose (cold) to grey (hot), traditional white, metamorphing yellow (cold) to orange (hot), and black.
They can be terminated with beaded leads up to 152 mm (6") long with spliced-on lead wire for lengths beyond 152 mm (6") and straight, ring, or spade terminals. Some are available with a thermocouple (any length).

Model Number		Wattage	Voltage Vac	Color	Watt Density*		Heater Body Temperature** (Typical Operating)
Without Thermocouple	Standard Type K Thermocouple				Watt Density*		Heater Body Temperature** (Typical Operating)
Without Thermocouple	Standard Type K Thermocouple				Watts/in²	Watts/cm²	°F	°C
CRB10216	CRB10217	150	220/240	Rose to Grey	6.48	1.00	560	293
CRB00216	CRB00217	150	220/240	White	6.48	1.00	560	293
CRB10006	CRB10008	250	220/240	Rose to Grey	10.80	1.67	756	402
CRB00006	CRB00008	250	220/240	White	10.80	1.67	756	402
CRB10014	CRB10016	400	220/240	Rose to Grey	17.27	2.68	942	506
CRB00014	CRB00016	400	220/240	White	17.27	2.68	942	506
CRB10020	CRB10022	650	120	Rose to Grey	28.07	4.35	1156	624
CRB00020	CRB00022	650	120	White	28.07	4.35	1156	624
CRB10023	CRB10025	650	220/240	Rose to Grey	28.07	4.35	1156	624
CRB00023	CRB00025	650	220/240	White	28.07	4.35	1156	624
CRB10088	CRB10165	650	480	Rose to Grey	28.07	4.35	1156	624
CRB00088	CRB00165	650	480	White	28.07	4.35	1156	624
CRB10028	CRB10030	1000	120	Rose to Grey	43.18	6.69	1420	771
CRB00028	CRB00030	1000	120	White	43.18	6.69	1420	771
CRB10031	CRB10033	1000	220/240	Rose to Grey	43.18	6.69	1420	771
CRB00031	CRB00033	1000	220/240	White	43.18	6.69	1420	771
CRB10089	CRB10045	1000	480	Rose to Grey	43.18	6.69	1420	771
CRB00089	CRB00045	1000	480	White	43.18	6.69	1420	771
* Watt density calculated using heater face surface area. ** E-Mitter heater body temperature as measured with internal thermocouple when mounted face down in stock CRK reflector and operating in 22°C (72°F) room ambient. Ordering Example: CRB10216, curved faced radiant heater, 150 W 220/240 Vac, rose to grey.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Standard Dimensions: 60 x 245 mm (2.36 x 9.65")

Without Thermocouple

CRB10216

Consult Sales

Availability:

150 Watts, 220/240 Volt, Color: Rose to Grey

Standard Type K Thermocouple

CRB10008

Consult Sales

Availability:

250 Watts, 220/240 Volt, Color; Rose to Grey

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR, GBP, or USD
Note: E-Mitters listed have 89 mm (3.5") ceramic bead insulated leads, #8-10 spade terminals, and a one-piece spring clip for mounting. WARNING: Hazard of Electric Shock. Installation must be grounded to earth to avoid shock hazard. Disconnect power to installation before servicing or installing heater. WARNING: Do not use Copper Wire to make connections inside this heater. High temperatures will oxidize copper. Use of nickel plated or nickel clad insulated copper wire is recommended. Wire insulation rating must be suitable for the ambient temperature of the wiring installation. CRK housings come complete with housing body, end plates, 5/16-18 mounting bolts, cover and ground lug. Note: These housings do not include the reflectors needed for mounting the heaters or the terminal block (Model number EHD-108-101) required for wiring each heater. * Watt density calculated using heater face surface area. ** E-Mitter heater body temperature as measured with internal thermocouple when mounted face down in stock CRK reflector and operating in 22°C (72°F) room ambient.
Ordering Example: (1) CRB00020 650 Watts, 120 Volt, Color; White, £38.31