PLATINUM^TM Series Universal Benchtop Digital Controllers

CS8DPT

Benchtop Digital Controller

^£662.49 CS8DPT

PLACE ORDER

Universal Inputs: Thermocouple, RTD, Process Voltage/Current, and Bridge/Strain
Simple to Configure and Use
Optional RS232/485 Communications
High Accuracy
Internal 5A SSR control output
4-Digit Dual Display (Setpoint and Process) or 6-Digit Single Display
5-Year Warranty
Auxiliary Output to Drive Higher-Current SSRs
Programmable Colour Displays, Standard
Operates from 90 to 240 Vac @ 50/60 Hz

Temperature and Process Controllers and Power Switching Devices - View related products

Description

The OMEGA™ CS8DPt is a ¹/₈ DIN size digital controller featuring the big CNPt Series colour-changing display. This bench controller features the LED displays that can be programmed to change colour between Green, Amber, and Red at any set-point or alarm point. Other options include, serial communications, Modbus^®, and Ethernet.

This universal temperature and process instrument handles 10 common types of thermocouples, multiple RTDs, thermistors and several process (DC) voltage & current ranges, and strain type of inputs.

Specifications
Accuracy: See table on Spec. Sheet for details
Resolution: 1°/0.1°; 10 µV process
Temperature Stability:
    RTD: 0.04°C/°C
    Thermocouple: cold-junction compensation 0.05°C/°C
    Process: 50 ppm/°C
CMRR: 120 dB
A/D Conversion: Dual-slope
Reading Rate: 20 samples per second
Digital Filter: Programmable
Display: 4-digit dual or 6-digit single, 9-segment LED; Red, Green, and Amber programmable colours.
Input Types: Thermocouple, RTD, thermistor, dc voltage, dc current and bridge (strain)
Thermocouple Type (ITS 90): J, K, T, E, R, S, B, C, N, L
RTD Input (ITS 68): 100/500/1000 Ω 2-, 3- or 4-wire; 0.00385 or 0.00392 curve
Thermistor Input: 2,252 Ω, 5 kΩ, 10 kΩ
Voltage Input: 0 to 100 mV, 0 to 1 Vdc, 0 to 10 Vdc
Input Impedance: 10 MΩ for 100 mV, 1 MΩ for 1 or 10 Vdc
Current Input: 0 to 20 mA (5 Ω load)
Strain Input: 0 to 50, 0 to 100 mV
Configuration: Differential
Polarity: Bipolar
Decimal Selection: None or 0.1 for temperature; None, 0.1, 0.01 or 0.001 for process
Control Output: 5A SSR (internal), 3A relay max, analogue process signals
Excitation Power: Selectable 5, 10, 12 or 24 Vdc @ 25 mA
Network and Communications
Ethernet: Standards compliance IEEE 802.3 10 Base-T
Supported Protocols: TCP/IP, ARP
RS232/RS485: Selectable from menu; both ASCII and MODBUS protocol selectable from menu; programmable 1200 to 115K baud; complete programmable set-up capability; program to transmit current display, alarm status, min/max, actual measured input value and status
Connection: USB, Ethernet (option), Serial (option)
General
Power: 236 W x 230 D x 108 mm H
Weight: 1.13 kg
Note: Power cables with plugs suitable for use in most countries are available to order separately.

Dimensions: 5A SSR (internal), 3A relay max, analogue process signals
Embedded Internet
The OMEGA™ Cs8DPt controllers can serve Web pages over an Ethernet LAN or even over the Internet, making it possible to monitor and control a process through a Web browser (such as Microsoft Internet Explorer®) from anywhere in the facility or anywhere in the world.

Remote Control
For example, using an CS8DPt Series temperature controller to control a heater, an engineer can monitor the temperature, change set-points or alarm points, turn the heater on and off, or make other modifications from anywhere on the local network or anywhere on the Internet. The Web pages are easily customized, and secure, password protected access to the devices is easily controlled. And it requires absolutely no special software on the engineer’s computer to view the data and “supervise” the controller— nothing other than a Web browser.

E-Mail and Alarm
In fact, the Cs8DPt controller can even send an e-mail to the engineer (or anyone he or she chooses) about an alarm condition or to update the status. Using the power of the Internet, the engineer could receive a message from the controller on an Internet-enabled pager or mobile phone.

Most remarkable is that all this can be accomplished without a computer. The OMEGA™ CS8DPt controller connects directly to the Ethernet network—not to the serial port of a computer functioning as a “server” and “master” to “slave” instruments connected through serial communications. The devices are also available with RS232 and RS485, and MODBUS serial communications (specify the C24 option).

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

CS8DPT

£662.49

Availability: In Stock

4-digit Benchtop controller, universal input (TC, RTD, PV, Strain)

CS8DPT-C24-EIP-A

£862.89

Availability: 8 weeks

4-Digit Benchtop controller with Ethernet, RS232/485 serial comm's and isolated analogue output

CS8EPT

£662.11

Availability: 8 weeks

6-digit Benchtop controller, universal input (TC, RTD, PV, Strain)

CS8EPT-C24-EIP-A

£912.67

Availability: 8 weeks

6-Digit Benchtop controller with Ethernet, RS232/485 serial comm's and isolated analogue output

Accessories

POWER CORD-UK

£7.37

Availability: In Stock

IEC Power cable with Plug suitable for use in UK. 10A Max. 5A fuse fitted

POWER CORD-E-10A

£27.50

Availability: 4 weeks

IEC Power cable with Plug suitable for use in mainland Europe

POWER CORD-IT

£27.98

Availability: 2 weeks

IEC Power cable with Plug suitable for use in Italy and Ireland

POWER CORD-DM

£28.53

Availability: 2 weeks

IEC Power cable with Plug suitable for use in Denmark

POWER CORD-SE

£9.93

Availability: 5 weeks

IEC Power cable with stripped ends 250 Vac max.

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with 2 output power cables and quick start manual. Full user manual available for free download.

PLATINUMTM Series Universal Benchtop Digital Controllers

CS8DPT

PLATINUM^TM Series Universal Benchtop Digital Controllers