Vent Plug IP55

DA084 Series

Vent Plug IP55

^£8.96 DA08400901

PLACE ORDER

High Degree of Protection
Easy to Install
IP55

NEMA Electrical Enclosures - View related products

Description

It has become more and more important to provide a protected enclosure environment for valuable and crucial electrical and electronic components. In a tightly closed enclosure, pressure differentials can occur during extreme temperature variations, such as day/night operation. When this occurs, the risk of dust and humidity being absorbed into the control panel increases dramatically. The specially designed pressure compensation plug DA084 permits a controlled change in pressure. It can be installed easily in any enclosure. Because of the pressure compensation plug’s high degree of protection IP55, the protection type of the enclosure will not be affected.

SPECIFICATIONS
Mounting: PG 29 thread with union nut
Material: Plastic according to UL94 V-0
Air Interface: Approx. 7 cm² (2.8 in²)
Dimensions: Ø 66 x 31 mm (2.6 x 1.2")
Fitting Position: Variable
Operating/Storage Temperature: -45 to 70°C (-49 to 158°F)
Installation: Make cut-out Ø 37 + 1 mm (1.5 + 0.03") in enclosure wall and mount pressure compensation device with nut. Please make sure that the sealing gasket is put in place on the outer side panel of the enclosure. For optimal pressure compensation we recommend to use two devices on opposite sides towards the top of the enclosure.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

DA08400901

£8.96

Availability: In Stock

Vent Plug with gasket

† All amounts shown in EUR, GBP, or USD
Note: Comes with operator’s manual.
Ordering Example: (1) DA08400901 Pressure compensation device, £8.96