Bridge/Strain Gage Signal Conditioner

DMD4059 Series

^£448.40 DMD4059

PLACE ORDER

These products are not CE marked and therefore are only available for export outside of the EU.
Standard DIN Rail Mounting
Non-Interactive Zero and Span
Fast Setup - Over 100 I/O Ranges
Removable Connectors
Full 3-Way Isolation
Output Test Button
Adjustable Excitation, 1 to 10 Vdc
Zero Offset

Description

The DMD4059 is no longer available. Please refer to DRC-4710 or DRC-4720 as an alternative.

The DMD4059 accepts an input from 1 to 4 full Wheatstone strain bridge sensors, pressure transducers or load cells. It provides filtering, amplifies, and converts the millivolt input signal into the selected dc voltage or current output that is linear to the input. The 3-way 1200V isolation eliminates ground loops, common mode voltages and greatly reduces noise pick-up. Sense wire connections are available to give maximum accuracy. Input, output, excitation and zero offset are field configurable via external rotary and slide switches. Offsets of up to ±100% of span can be used to cancel sensor offsets or tare fixed loads. Features such as red and green LEDs vary in intensity to show input and output activity and an output test button helps with set-up and troubleshooting.

These products are not CE marked and therefore are only available for export outside of the EU.

† All amounts shown in EUR, GBP, or USD
Note: These products are not CE marked and therefore are only available for export outside of the EU.