Thin Film Platinum RTD Elements. Pt100 and Pt1000 ohm, 2 x 2 mm

F2020

Pt100 and Pt1000 Platinum RTD elements - Order Online

^£1.89 F2020-100-A

PLACE ORDER

Low Cost OEM Price, minimum order quantity is 10pcs
w 2.1 x l 2.3 x d 0.9 mm elements with platinum clad nickel wire leads l 10 x dia. 0.2 mm
Class A and 1/3 B Tolerances
Temperature Range -50 to +300°C for Class A; 0 to +150°C for class 1/3B
Specification DIN EN 60751 (according to IEC 751)
Temperature Coefficient TCR = 3850 ppm/K
100 and 1000 Ohm Configurations

RTD (PT100) Probes, Elements and Assemblies - View related products

Description

Click on this link if you need more information about Pt100.

These elements conform to the internationally accepted requirements of IEC60751, which defines the resistance vs. temperature characteristics of the sensors, their base resistance at 0°C and their accuracy (see below).

Class	Tolerance (°C)	Tolerance of resistance at 0°C (Ω)	Temperature Range
1/3B (AA)	±(0.1 + 0.0017t)	±0.04Ω	0 to +150°C
A	±(0.15 + 0.002t)	±0.06Ω	-50 to +300°C

Long-term stability: Max. Ro drift 0.04% after 1000 hours at 500°C
Vibration resistance: At least 40g acceleration at 10 to 2kHz, depending on installation
Shock resistance: At least 100g acceleration with 8 ms half sine wave, depending on installation
Insulation resistance: >100 MΩ at 20 °C; >5 MΩ at 500 °C
Self heating: 0.4 K/mW at 0 °C
Measuring current: 100 Ω: 0.3 to 1 mA; 1000 Ω: 0.1 to 0.3 mA (self-heating should be considered)
Response time:
Water (v = 0.4 m/s): t_0.5 = 0.05 s; t_0.9 = 0.15 s
Air (v = 2 m/s): t_0.5 = 3 s; t_0.9 = 10 s
Dimensional tolerance: ±0.2 mm

Note: These RTD elements are made with platinum coated nickel lead wires. Since platinum does not easily wet with most soft solders, we advise that they be spot welded or silver soldered to extension wires when required.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Pt100 elements: 100 Ω at 0 °C

F2020-100-A

£1.89

Availability: In Stock

100 Ω Class A, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs

F2020-100-1/3B

£3.66

Availability: In Stock

100 Ω Class 1/3B, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs

Pt1000 elements: 1 kΩ at 0 °C

F2020-1000-A

£1.74

Availability: 20 weeks

1 kΩ Class A, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs

F2020-1000-1/3B

£3.66

Availability: In Stock

1 kΩ Class 1/3B, 2.1 x 2.3 x 0.9 mm. Price shown is each. Minimum order qty = 10 pcs

† All amounts shown in EUR, GBP, or USD
Ordering Example: (10) F2020-100-A Class A 2 x 2 mm Pt100 Elements, £1.890