Lube/Coolant Flow Monitor

FL-O5

PLACE ORDER

±5% Full Scale Accuracy
±1% Reading Repeatability
Built-in Signal Switch
Stainless Steel and PTFE and Aluminum Wetted Parts
For Coolants or Lubricants with 0.84 Specific Gravity
Designed for Use with Clear or Opaque Liquids
Oil and Dust Resistant Case
200 psig Pressure Rating
93°C (200°F) Temperature Rating

Description

The FL-O Series of industrial flowmeters is designed expressly for flowrate monitoring of petroleum-based oils and coolant fluids. These simple, rugged meters are designed for industrial use with all 300 Series SS and PTFE wetted parts and an aluminum housing. There are no fragile glass tubes, and the flowrate can easily be read even with opaque fluids. The built-in signal switch can be used as an alarm to report high or low fluid rates. FL-O flow monitors are also capable of withstanding the extremes of industrial use, with 200 psig and -18 to 93°C (0 to 200°F) environmental ratings.

SPECIFICATIONS:
Accuracy: ±5% of full scale
Maximum Pressure: 200 psi Repeatability: ±1% of reading
Average Pressure Drop: 2-5 psi (increasing over rated flow range)
Weight (approximate): 1.8 kg (4 lb)
Switch: 3-Wire SPDT, 15 A @ 125 Vac
Connection: 3 /4" FNPT
Wetted Parts: 300 Series SS, PTFE , Aluminum; Polysulfone
Seals: PTFE and Buna

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator's manual.