Variable Area Flow Meters for Corrosive Applications - Discontinued

FL-1800

±5% Full Scale Accuracy
±0.5% Full Scale Repeatability
Large 150 mm (5.9") Scale
Correlation Charts for Air and Water
PVDF and Glass Wetted Parts
Machined End Fittings
Side Plate Construction
Non-Rotating Seal Spindle

Description

The FL-1800 Series has been discontinued. Please see the FL-3000 and 3100 Series as a possible alternative or contact our Flow Engineering department.

OMEGA™ FL-1800 Series Flowmeters are designed for use with corrosive materials. These special flowmeters utilize PVDF and glass wetted parts for excellent corrosion resistance where standard variable area flow meters would be unacceptable. Because of this construction, these flowmeters can be used with most acids and bases, in addition to working with many organic solvents.

SPECIFICATIONS
Scales: 150 mm (5.9"), 0 to 150 mm with correlation charts for air and water
Accuracy: ±5% full scale
Repeatability: ±0.5% full scale
Connections: ¼ NPT, female horizontal
Metering Tubes: Borosilicate glass
Floats: Glass
End Fittings, Seal Spindle: PVDF
Side Plates: Aluminum
Float Stops: PTFE
Tube Packing: FKM
O-Rings: FKM
Max Pressure: 10.34 bar (150 psig) at 38°C (100°F)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

FL-1801

Consult Sales

Availability:

4.9 to 49 cc/min air ,.054 to .537 cc/min water

FL-1805

Consult Sales

Availability:

.24 to 2.35 LPM air, 5.3 to 52.8 cc/min water

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with correlation charts for air and water, and operator's manual.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)