Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Discontinued

Currency: 

FP-6000

FP6000 Discontinued
 | FP-6000

FP6000 Discontinued

  • Flow Sensors for Lines 1½" to 36"
  • No Special Fitting Needed
  • Low Cost Flow Sensors

Description


Compatible Meters:
  • DPF700
  • DPF70 with FLSC-AMP
  • FP90
  • FPM-5500
  • FPM-9020A
Related links below.
When you want it all in one flow sensor, you want the FP-6000 sensor. accuracy...durability versatility...easy installation... low cost - the FP-6000 gives you all this.

The FP-6000 accurately measures a wide variety of fluids with flowrates as low as 1.6 feet per second up to 20 feet per second. It generates a sine-wave frequency output linearly proportional to flowrate with ±0.2 fps accuracy. The FP-6000 is versatile, adjusting to various pipe sizes. There is no need to buy a different sensor for every change in pipe size. You can position the FP-6000 to give you accurate readings in any size pipe (1½ to 36"), permitting tremendous cost savings.

No special fittings are required. A standard 1½" threadolet or saddle fitting is all you need.

Made of rugged brass, the FP-6000 can handle harsh environments. The output signal can be sent up to 30 m (100') without amplification. Each FP-6000 sensor comes with a 7.5 m (25') cable and all necessary mounting hardware.

SPECIFICATIONS
Output Signal:
Sine wave, 80 mV p-p/fps
Output Frequency: 11 Hz/fps
Source Impedance: 10,000 Ω
Flow Rate Range: 1.6 to 20 feet per second (fps)
Linearity: ±1% of full range
Repeatability: ±0.5% of full range
Maximum Operating Pressure: 225 psi Maximum Operating Temperature: 100°C (212°F)
Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity

MATERIALS - Sensor
Rotor:
CD4MCu Stainless Steel
Rotor Shaft: Tungsten Carbide Steel
Transducer Body: C 36000 Brass
Bearing: Carbon/graphite filled fluoroplastic (Fluoroloy B)
Fitting Housing & Cover: Brass
Seal: FKM O-Ring
Shipping Weight: 2.7 kg (6 lb)
Dimensions: From flange to rotor pin, 151 mm (5.94"), overall cable type twisted pair with foil shield
Connection: 1½ NPT or 1.5" ISO
Cable Length: 7.5 m (25')
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
Accessories
FP-3-1500-302
£650.87
Availability: 14 weeks
 
Hot-tap installation tool
FP-52509-1
Consult Sales  
Availability: 
 
 
Complete replacement 316SS rotor/paddlewheel
FP-52509-2
£95.48
Availability: 10 weeks
 
Complete replacement Tungsten Carbide rotor/paddlewheel kit
All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator's manual
We noticed you are from the US. Visit your local site for regional offers and live support.