Economical Flow Sensors - Discontinued

FTB2000 Series

Economical Flowrate Sensors

PLACE ORDER

Measures Low Liquid Flow Rates of 0.5 to 29.9 l/m
FDA Approved Materials
Lightweight Plastic Design Permits Mounting in Any Position
FTBMC2005 has 2-30l/m range. 3/8"BSPP fitting and 1m cable
FTB2000 models have 3/8" NPT fitting and spade terminals for electrical connection.

Description

This product is discontinued and is replaced by BV1000-2000-3000-Series

More information about how a Flow meter works in this link.

The FTB2000 series Hall-effect turbine flowrate sensor is ideal for OEM applications involving low flow liquid monitoring. The low cost, coupled with 1/2 % repeatability, makes it an ideal candidate for replacing dispensing timer systems. Unlike existing timing systems, turbine technology is not influenced by changes in system pressure caused by aging filters. The sensor’s standard power and output specifications make it easy to retrofit to existing controllers.

SPECIFICATIONS:
Wetted Materials
Accuracy: ±3% of reading
Repeatability: 0.5% of full scale
Body: Nylon 12
Turbine: Nylon 12 Composite
Bearings: PTFE/15% Graphite
Operating Pressure: 13.7 bar
Operating Temperature: -20 to 100°C
Viscosity: 32 to 81 SSU (.8 to 16 centistokes)
Filter: <50 microns Input
Power: 5 to 24 Vdc @ 8 mA
Output: NPN Sinking Open Collector @ 50 mA Maximum (1 to 2.2 K Ohm Pull-Up Resistor Required) (Hz Output)
Electrical Connection: FTBMC2005 model: 1m Cable. IP65 rated. FTB Models: Spade Terminals 2.8/6.3 x 0.8 mm (0.110/.248 x 0.031")
Inlet/Outlet Ports: FTBMC2005 model: 3/8" BSPP (G 3/8) Male FTB Models: 3/8" NPT Male

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Accessories

DPF20-HV-R1-R1

£282.57

Availability: 8 weeks

6 digit, 1/8 DIN panel meter for Rate or Total, 85 to 260 Vac powered, with dual relay outputs

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator's manual.