Vortex Shedding Flow Meter and Temperature Transmitter

FV100 Series

Vortex Flow Meter | Flow & Temperature Transmitter

^£603.01 FV101

PLACE ORDER

No Moving Parts to Jam
1/4 FNPT to 4" Line Sizes
Bright LED Display
Individual 4 to 20 mA Outputs for Flow and Temperature
SPST SSR Alarm(s)
Learn more about the vortex flow meter principle.

Vortex Shedding Flowmeters and Pitot Tubes - View related products

Description

The FV101 Series comprises in-line flow meters that use the vortex shedding measuring principle. The fluid strikes a bluff body, imparting alternating vortices downstream of the bluff. This creates a pressure on a sensor body containing a piezoelectric crystal. The frequency of the sensor is proportional to the velocity of the fluid and is amplified and converted to a 4 to 20 mA output signal. Vortex technology yields a meter with no moving parts to hang up or wear. The meter has a bright 7.62 mm (0.3") high LED display of flow in either liters or gallons. The FV101 Series can be used with non-viscous, clean, or dirty waterlike liquids that are compatible with brass, PVDF, and FKM. Measured fluids should not contain long fibers or a high level of abrasive solids. These meters are ideal for cooling loops using water or 50% glycols, and for water-soluble machine coolant (up to 10%). These applications are found in most process industries, including rubber, steel, fabrication, manufacturing, refining, paper, chemical, food, petrochemical, and power. Do not use on flammable liquids or on gases such as air.

SPECIFICATIONS
Flow
   Accuracy: ±2% FS
   Repeatability: ±0.25% FS
   Alarm Deadband: 5% FS
   Response Time: User selectable from 0.9 to 7.5 seconds
   Max Flow: Over range occasionally up to 125% of capacity
Temperature
   Accuracy: ±1% FS
   Response Time: 450mS time constant
   Alarm Deadband: 2%
Display: 3-digit, 7.62 mm (0.3") high numeric LED that flashes below setpoint
Maximum Operating Pressure:
   2" and Smaller: 20 bar (300 psig)
   3 and 4": 13 bar (200 psig)
Operating Temperature: 2 to 66°C (35 to 150°F)
Enclosure Rating: IP65; Type 1, 3, 4, 12, and 13
Analog Output: 4 to 20 mA (600 Ω @ 24 Vdc)
Electrical Connection:
   FV100 Units (Flow Only): 5-pin micro male connector
   FV100-T Units (Flow/Temperature): 8-pin male micro connector
Alarm Output: SPST SSR, NO or NC operation, selectable; dual alarms for flow/temperature units
   FV101 and 102:250 mA @ 30 Vdc up to 66°C (150°F)
   FV103 thru 108:125 mA @ 30 Vdc up to 66°C (150°F); reduced current rating at higher temperatures
Power: 10 to 30 Vdc @ 80 mA
Wetted Parts: Brass, PVDF and FKM seals; 316 SS bodies available for special order on 1/4 to 1/2" sizes, contact Flow Engineering for details
Installation: 10 pipe diameters upstream and 5 downstream recommended

Flowmeter Model No.	Flowmeter/ Temperature Transmitter Model No.	Fittings	Flow Range (gpm)		Max Pressure Drop psid	Weight kg (lb)
Flowmeter Model No.	Flowmeter/ Temperature Transmitter Model No.	Fittings	Min	Max	Max Pressure Drop psid	Weight kg (lb)
FV101	—	¼ FNPT	0.4	4	9.2	1.3 (2.8)
FV102	—	½ FNPT	1.2	12	3.6	1.2 (2.6)
FV103	FV103-T	¾ FNPT	2.5	25	3.6	2.9 (6.3)
FV104	FV104-T	1 FNPT	5	50	9.5	2.7 (5.9)
FV105	FV105-T	1½ FNPT	10	100	4.8	5.9 (13)
FV106	FV106-T	2 FNPT	20	200	4.9	4.8 (10.5)
FV107	FV107-T	3" ANSI RF	30	300	1.3	19 (42)
FV108	FV108-T	4" ANSI RF	60	600	1.3	25 (55)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

VORTEX FLOWMETERS

FV101

£603.01

Availability: 15 weeks

0.4 to 4 GPM range

FV101-SS

£980.61

Availability: 15 weeks

0.4 to 4 GPM range, with 316 SS construction

FV102

£619.62

Availability: 8 weeks

1.2 to 12 GPM range

FV102-SS

£934.93

Availability: 15 weeks

1.2 to 12 GPM range, with 316 SS construction

FV103

£962.80

Availability: 2 weeks

2.5 to 25 GPM range

FV104

£928.35

Availability: 2 weeks

5 to 50 GPM range

FV105

£1,175.17

Availability: 2 weeks

10 to 100 GPM range

FV106

£1,204.00

Availability: 15 weeks

20 to 200 GPM range

FV107

£2,520.00

Availability: 15 weeks

30 to 300 GPM range

FV108

£3,137.00

Availability: 15 weeks

60 to 600 GPM range

VORTEX FLOWMETERS with INTEGRAL TEMPERATURE TRANSMITTER

FV103-T

£1,115.97

Availability: 2 weeks

2.5 to 25 GPM range

FV104-T

£1,131.81

Availability: 15 weeks

5 to 50 GPM range

FV105-T

£1,340.83

Availability: 2 weeks

10 to 100 GPM range

FV106-T

£1,378.63

Availability: 15 weeks

20 to 200 GPM range

FV107-T

£2,713.90

Availability: 15 weeks

30 to 300 GPM range

FV108-T

£3,688.00

Availability: 15 weeks

60 to 600 GPM range

Accessories

PSR-24L

£75.25

Availability: In Stock

Regulated power supply, US plug, 90-264 Vac input, 24 Vdc output, 400 mA, stripped leads, UL

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator’s manual. Flow-only models come with 1 m (3.3') cable. Flow/temperature models come with 2 m (6.5') cable.

Ordering Example: (1) FV103-T Vortex meter with temperature, £1,115.97

Product Manuals:

Download FV100 Series - Vortex Shedding Flowmeters Maintenance

Download FV100/FV100T Series - Vortex Shedding Flowmeters and opt. Temp Transmitters