General Purpose Electropneumatic Transducers - NOT CE Compliant - Not for sale in UK/EU

IP211 and EP211

General Purpose Electropneumatic Transducers

^£345.36 IP211-X15

PLACE ORDER

Low Cost
Built-in Volume Booster
Small Size
Field Reversible
Low Air Consumption
Mounts at Any Angle
Convenient External Span and Zero Adjustment
(Except for Explosion Proof Models)
NEMA 4 (IP65 Enclosure)
Wide Supply Pressure Range
Low Supply Pressure Sensitivity

Valves, Regulators and I/P Converters - View related products

Description

The IP211/EP211 Series transducer is an electropneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The 211 Series accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM). Model selection includes General Purpose, FM Intrinsically Safe, and CSA Intrinsically Safe.

Mounting
These transducers can be pipe, panel, or bracket mounted in any position. Positions other than verticle will require recalibration of the zero adjustment. For maximum output stability the transducers should be mounted in a vibration free location or such that vibration is isolated in the X and Z axis.

Field Reversible
All transducers are calibrated at the factory for direct acting operation but may be used in the reverse acting mode by reversing the polarity of the signal leads and recalibrating. When recalibrated for reverse acting applications, the transducers provide a minimum of their full rated output pressure (i.e.15, 27, or 30 psig) upon input signal failure.

Please Review the pdf Spec Sheet for Complete Product Specifications!

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

General Purpose Current to Pressure (i/p)

FM Intrinsically Safe Current to Pressure (i/p)

CSA Intrinsically Safe Current to Pressure (i/p)

General Purpose Voltage to Pressure (e/p)

Accesories

TX4-100

£40.72

Availability: In Stock

4-Conductor Shielded Wire

OP-6

Consult Sales

Availability:

Reference Book: Fundamentals of Temperature, Pressure & Air Flow Measurement

† All amounts shown in EUR, GBP, or USD
Note: Comes with complete operator’s manual and mounting bracket.
Ordering Example: (1) IP211-X60 2 to 60 psig, 0.1 to 4.1 bar, 4 to 20 mA input range, £407.64