LC411_LCM411-USBH
Compression Load Cells with usb interface
-
High speed USB load cell with up to 1000 Readings per Second
-
Free Logging and Charting Software Available
-
5-Point NIST Traceable Calibration Provided
-
USB 2.0 and Below Compatible, Powered Completely by the USB Port
-
All Stainless Steel for Harsh Industrial Environments
-
Built-In 59K Shunt Cal Resistor
Load Cells, Force Sensors and Torque Transducers - View related products
Description
This item is discontinued.
More information about how a load cell works in this link.
The LC411-USBH Series high
speed USB load cells connect
directly to your computer. Free PC
software makes data logging and
charting your readings a simple
task. Also included are .NET APIs and a command set for command line access. No additional power supply is needed. The load cell is powered directly from your computer’s USB port.
SPECIFICATIONS
Excitation: From USB port
Output: Digital (USB 2.0)
5-Point Calibration: Included 0%, 50%, 100%, 50%, 0%
Note: Models > 300,000 lbf are calibrated at 300,000 lbf. Full scale calibrations above 300,000 lb by quotation only.
Response Time: Up to 1 ms; non-impact loading
Linearity:
≤3000 lb: ±0.13% full scale
>3000 lb: ±0.10% full scale
Hysteresis:
≤3000 lb: ±0.12% full scale
>3000 lb: ±0.10% full scale
Repeatability: ±0.05%
Zero Balance: ±1.0% full scale
Operating Temperature: -40 to 80°C
Compensated Temperature: 16 to 71°C
Thermal Effects:
Zero: 0.0045%FSO/°C
Span: 0.006%FSO/°C
Safe Overload: 150% full scale capacity
Ultimate Overload: 300% full scale capacity
Full Scale Deflection: 0.025 to 0.076 mm typical
Electrical Connection: 1.8 m cable with standard USB connector
Protection Class: IP65
† All amounts shown in EUR, GBP, or USD
Note: Comes complete with 5-point NIST traceable calibration, cable with USB connector, and PC software.
Dual bridge models available, add suffix “-DUAL” to model
number and additional cost.
CLOSE
