Cookies on the OMEGA websites We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
The OMEGA™ MDS8PT is a 1/8 DIN size (96 x 48 mm) digital
panel meter in a benchtop plastic enclosure featuring the Pt Series color-changing display.
The Pt Series meters feature
4 or 6 digit LED displays that can be
programmed to change color
between GREEN , AMBER, and
RED at any set-point or alarm
point. Other options include
isolated programmable analog
output, serial communications,
Modbus® and Ethernet.
The universal temperature and
process instrument handles 10
common types of thermocouples,
thermistors, multiple RTD’s, and
several process (DC) voltage and
current ranges.
Specifications Single-Channel
Universal Inputs
Accuracy: See table for details Resolution: 1°/0.1°; 10 µV process Temperature Stability: RTD: 0.04°C/°C Thermocouple @ 25°C (77°F):
0.05°C/°C (cold junction compensation) Process: 50 ppm/°C CMRR: 120 dB A/D Conversion: 24-bit sigma delta Digital Filter: Programmable Display: 4- or 6-digit, 9-segment LED,
21 mm (0.83") GREEN, AMBER, and
RED programmable colors for process
variable, set point and temperature units Input Types: Thermocouple, RTD,
thermistor, analog voltage, analog current Thermocouple Type (ITS 90):
J, K, T, E, R, S, B, C, N, L RTD Input (ITS 90): 100/500/1000Ω
Pt sensor, 2-, 3- or 4-wire; 0.00385 or
0.00392 curve Thermistor Input: 2252 Ω, 5K Ω, 10K Ω Voltage Input: -100 to 100 mV, -1 to
1 V, -10 to 10 Vdc Current Input: 4 to 20 mA, 0 to 24
mA scalable Configuration: Differential Polarity: Bipolar Step Response: 0.7 s for 99.9% Decimal Selection: None, 0.1 for
temperature; none, 0.1, 0.01 or
0.001 for process Set-Point Adjustment: -9999 to
9999 counts Span Adjustment: 0.001 to 9999
counts Offset Adjustment: -9999 to +9999 Network and
Communications
Ethernet: Standards Compliance
IEEE 802.3 10/100 Supported Protocols: TCP/IP, ARP RS232/RS485: Selectable from
menu; both ASCII and
Modbus protocol selectable
from menu; programmable 1200 to
115.2 Kb; complete programmable
setup capability; program to transmit
current display, alarm status, min/
max, actual measured input value
and status Connection: USB connector on
front panel; optional alarm 1 and 2
(programmable) Optional Alarm 1 and 2
(Programmable)
Type: Form “C” SPDT relays
Operation: High/low, above/below,
limited output to 30 Vrms, 60 Vdc max,
band, latch/unlatch, normally open/
normally closed and process/deviation;
front panel configurations Optional Analog Output
(Programmable):
Isolated, retransmission 0 to 10 Vdc
or 0 to 20 mA, 500 Ω max (output 1 only).
Accuracy is ± 1% of FS when following
conditions are satisfied.
1) Input is not scaled below 1%
of input FS
2) Analog output is not scaled below
3% of output FS General
Power: 90 to 240 Vac, 50 to 60 Hz Note: Power cords for 120 Vac operation are
available. See “Accessories.”
† All amounts shown in EUR, GBP, or USD Note: Comes with quick start manual.
Please select the power cord from the accessories list.
We noticed you are from the US. Visit your local site for regional offers and live support.