Metric Multiconductor Feedthroughs

MFT Metric Series

PLACE ORDER

Pressure or Vacuum Applications
Seals Multiple Thermocouples and Protection Tubes
Available in Both NPT and ISO T/BPST Mounting Threads
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included
3 to 16 Probes
416 SS Body and Cap
316 SS Ferrules Standard
PTFE Ferrules Available
OMEGALOKR Ferrules Standard
1 to 6 mm (0.040 to 1.4") Probe Diameters

Thermocouple Connectors and Panel Systems - View related products

Description

These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Thread is ISO/BPST

MFT-M10-3

£120.29

Availability: 5 weeks

1.0mm probe, 3 probes, 1/4in. Thread

MFT-M10-5

£147.14

Availability: 5 weeks

1.0mm probe, 5 probes, 1/4in. Thread

MFT-M10-6

£157.36

Availability: 5 weeks

1.0mm probe, 6 probes, 1/4in. Thread

MFT-M15-3

£110.67

Availability: 5 weeks

1.5mm probe, 3 probes, 1/4in. Thread

MFT-M30-3

£101.73

Availability: 5 weeks

3.0mm probe, 3 probes, 1/4in. Thread

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR, GBP, or USD
Note: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Ordering Example: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, £157.36

Part Number Builder

Build Your Part Number Below

	(1)	(2)
MFT

Option Descriptions:

(1) Diameter of Probe select from:
-M10 for 1.0mm
-M15 for 1.5mm
-M30 for 3.0mm
-M45 for 4.5mm
-M60 for 6.0mm

(2) Number of Probes select from:
-3 for 3 probes
-5 for 5 probes
-6 for 6 probes
-8 for 8 probes
-10 for 10 probes
-12 for 12 probes
-16 for 16 probes

Note: All combinations may not be valid, check spec sheet for valid part numbers.