Lightweight Oil Immersion Heater With 2" NPT Steel Fitting

MTO-2 Series

MTO2_LIGHT Series Lightweight Oil Immersion Heater

^£465.59 MTO-215A/120V

PLACE ORDER

Rugged Steel Sheath for Use with Lightweight Oils
1.5 to 6 kW
120 280, 240 or 480V. Single Phase

Immersion Heaters - View related products

Description

Please Note: The immersion heater should be used with an approved temperature control device to assure safe operation. See Temperature Section for our selection of process controllers.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warning.

kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	E1 General Purpose Enclosure¹		E2 Moisture Resistant Enclosure.²
kW	W/in2	No. Htg. Elem.	Dim. B in (cm)	Model No.	Wt. Ib (kg)	Model No.	Wt. Ib (kg)
1.5	24	2	11 3/4(30)	MTO-215A/*	3 (1)	MTO-215E2/*	6 (3)
2	24	2	17 3/4 (45)	MTO-220A/*	4 (2)	MTO-220E2/*	7 (3)
2.5	26	2	19 5/8 (9)	MTO-225A/*	4 (2)	MTO-225E2/*	7 (3)
3	23	2	24 7/8 (63)	MTO-230A/*	4 (2)	MTO-230E2/*	7 (3)
4	23	2	32 3/4 (83)	MTO-240A/*	6 (3)	MTO-240E2/*	8 (4)
5	23	2	40 1/4 (102)	MTO-250A/*	7 (3)	MTO-250E2/*	8 (4)
6	23	2	47 3/4 (121)	MTO-260A/**	7 (3)	MTO-260E2/**	9 (4)

/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 VAC, 240 for 240 Vac, or 480 for 480 Vac.
//* Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
1 Heaters with General Purpose Enclosures are UL recognized and CSA Certified.
2 Heaters with Moisture Resistant Enclosures are CSA NRTL/C Certified.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

MTO-215A/120V

£465.59

Availability: 7 weeks

Heater, 1.5 kW, 120 V, E1 general purpose enclosure

MTO-225A/208V

£572.54

Availability: 7 weeks

Heater, 2.5 kW, 208 V, E1 general purpose enclosure

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR, GBP, or USD
Ordering Example: (1) MTO-215A/240V 1.5 kW heater powered by 240 Vac, £468.55

Part Number Builder

Build Your Part Number Below

	(1)	(2)		(3)
MTO-2			/

Option Descriptions:

(1) Wattage select from:
15 for 1.5 kW
20 for 2 kW
25 for 2.5 kW
30 for 3 kW
40 for 4 kW
50 for 5 kW
60 for 6 kW

(2) Enclosure select from:
A for General Purpose Enclosure
E2 for Moisture Resistant Enclosures

(3) Voltage select from:
120V for 120 V
208V for 208 V
240V for 240 V
480V for 480 V

Note: All combinations may not be valid, check spec sheet for valid part numbers.