Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

96-Bit and 48-Bit High Current Digital I/OBoards for the PCI Bus

PCI-DIO96H and PCI-DIO48H

96-Bit and 48-Bit High Current Digital I/OBoards for the PCI Bus | PCI-DIO96H and PCI-DIO48H

CE
  • 48 or 96 High Current Digital I/O Bits
  • High Drive Output (64 mA Sink, 15 mA Source)
  • Fully Plug-and-Play

Description

The PCI-DIO96H and PCI-DIO48H are high density, logic level, digital I/O boards for IBM or compatible PC’s with a PCI bus. The PCI-DIO96H offers 96 bits of digital I/O, while the PCI-DIO48H has 48. For both boards, the I/O, in 24-bit groups, is based on an 82C55, mode 0 emulation. Each group provides an 8-bit port A and port B, as well as an 8-bit port C that can be split into a 4- bit port C-HI and a 4-bit port C-LO. The digital output drivers are 74S244 chips, and provide 64 mA sink and 15 mA source output capabilities. The input buffers are 74LS373 and offer the high standard input impedance of the 74LS series. On power up and reset, all I/O bits are set to input mode. Like all members of the 74LS series, unconnected inputs will typically float high. If you are using the board to control items that must be OFF on reset, you will need to install pull-down resistors. Provisions have been made on the board to allow users to install SIP resistor networks quickly and easily in either pull-up or pull-down configurations.
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
PCI-DIO48H
Consult Sales  
Availability: 
 
 
48-bit, high current, logic level digital I/O board for PCI bus
PCI-DIO96H
Consult Sales  
Availability: 
 
 
96-bit, high current, logic level digital I/O board for PCI bus
CIO-ERB48
Consult Sales  
Availability: 
 
 
48-channel relay rack with 6 amp, form C relays (see Section H for details)
CIO-MINI50
£112.61
Availability: 2 weeks
 
50-pin, screw terminal board (one required for PCI-DIO48H, two required for PCI-DIO96H)
C50FF-2
Consult Sales  
Availability: 
 
 
50-pin ribbon cable, 2' long (use for PCI-DIO48H)
C100FF-2
Consult Sales  
Availability: 
 
 
100-pin ribbon cable, 2' long. Splits 100-pin connector into two 50-pin connectors (one is required for PCI-DIO96H)
UNIV-DRVR
Consult Sales  
Availability: 
 
 
Universal Software Library
CIO-LABVIEW-DRVR
Consult Sales  
Availability: 
 
 
LabVIEW drivers
All amounts shown in EUR, GBP, or USD
Note: The PCI-DIO series comes with InstaCal test software and a complete operator’s manual
We noticed you are from the US. Visit your local site for regional offers and live support.