Platinum RTD Immersion

PLATINUM-RTD-IMMERSION

^£40.54 A/100-2W-INW-4-PB

PLACE ORDER

Chilled Water Systems
Hot Water Systems
Boilers
Pumps

RTD (PT100) Probes, Elements and Assemblies - View related products

Description

PRODUCT SPECIFICATIONS

Sensor Type \| Sensor Curve:	Platinum RTD \| PTC (Positive Temperature Coefficient)
Number Sensing Points:	One
Number Wires:	A/100-2W-I Series and A/1K-2W-I Series: Two (Non-Polarity Sensitive) A/100-3W-I Series and A/1K-3W-I Series: Three (Polarity Sensitive)
Sensor Output @ 0°C (32°F):	A/100-xW-I Series: 100 Ohms nominal \| A/1K-xW-I Series: 1000 Ohms nominal
Sensor Accuracy:	+/- 0.06% Class A (Tolerance Formula: +/- °C = (0.15°C + (0.002 * \|t\|)) where \|t\| is the absolute value of Temperature above or below 0ºC in ºC) -40°C (-40°F): +/- 0.23°C (+/- 0.414°F) \| 0°C (32°F): +/- 0.15°C (+/- 0.27°F) 200°C (392°F): +/- 0.55°C (+/- 1.00°F)
Din Standard \| Temperature Coeffcient:	DIN EN 60751 (IEC 751) \| 3850 ppm / °C
Stability:	+/- 0.03% after 1000 Hours @ 300°C (572°F)
Response Time (63% Step Change):	8 Seconds nominal
Self-Heating \| Maximum Operating Current:	100 Ohm RTD: 7 mW/°C (Still Air) \| 5 mA 1K Ohm RTD: 4mW/°C (Still Air) \| 3 mA
Operating Temperature Range:	-40 to 200°C (-40 to 392°F)
Storage Temperature Range:	-40 to 85°C (-40 to 185°F)
Operating Humidity Range:	10 to 95% RH, non-condensing
Probe Diameter:	0.250" (6.35mm)
Probe Material:	304 Stainless Steel
Thermowell Material \| Bore Diameter:	304 Series Stainless Steel \| 0.260"
Thermowell Instrument Thread \| Process Thread:	1/2" NPS (National Pipe Straight) Female Thread \| 1/2" NPT) (National Pipe Tapered) Male Thread
Fitting Material \| Flammability Rating:	Polyamide 66 (High Performance Nylon 66) \| UL94-HB
Foam Pad Material \| Flammability Rating:	Neoprene/EPDM/SBR Polymer \| UL94-HBF; FMVSS-302; MIL-R-6130C
Sensor Threads:	1/2" NPS (National Pipe Straight) Male Thread
Lead Length \| Conductor Size:	14" (35.6 cm) \| 22 AWG (0.65mm)
Lead Wire Insulation \| Wire Rating:	Etched Teflon (PTFE) Colored Leads \| Mil Spec 16878/4 Type E)
Conductor Material:	Silver Plated Copper
Agency Approvals:	CE, RoHS, WEEE

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

A/100-2W-INW-4-PB

£40.54

Availability: 3 weeks

100 Ohm (Two Wires) RTD, Immersion, No Well, 4", Plastic Enclosure

A/100-3W-INW-4-PB

£40.54

Availability: 3 weeks

100 Ohm (Three Wires) RTD, Immersion, No Well, 4", Plastic Enclosure

A/1K-2W-INW-4-PB

£40.54

Availability: 3 weeks

1,000 Ohm (Two Wires) RTD, Immersion, No Well, 4", Plastic Enclosure

A/1K-3W-INW-4-PB

£40.54

Availability: 3 weeks

1,000 Ohm (Three Wires) RTD, Immersion, No Well, 4", Plastic Enclosure

† All amounts shown in EUR, GBP, or USD