Thermowell with Hygienic Tri-Clamp fitting and Removable Pt100 Sensor with Polypropylene Terminal Head

PRS-TW-NB9W Hygienic RTD Sensors

^£287.64 PRS-3-100-A-TW-0250-D1-NB9W

PLACE ORDER

Clean-In-Place Design for Use in Food, Dairy and Pharmeceutical Processes
Removable Probe Assembly is Spring Loaded Into Thermowell for Good Thermal Response
Standard Mounting Cap is a 1½" Tri-Grip^TM (Tri-Clamp^® Compatible) Design, Other Cap Sizes and Styles are Available
Avalable with 1⁵⁄8, 2½:", 4½", 7½" and 10½" Immersion Lengths Standard
White Polypropylene Screw Cap Terminal Head with M20 Cable Entry is Standard, Stainless Steel and Flip Top Polypropylene Heads Also Available
Wetted Surfaces are 316L Stainless Steel with a Surface Finish of 32 microinches or Better
4-Wire, Pt100 Class A Platinum RTD Sensor (100.00±0.06Ω at 0°C) Standard
Process Measurement Temperature Range: -50 to +200°C
Compatible with 3-Wire and 2-Wire RTD Instruments & Transmitters

Sanitary - View related products

Description

Find how Sanitary Sensors works on this link.

This Pt100 RTD sensor is designed for use in sanitary or Clean-In-Place (CIP) applications where the use of a thermowell assembly is preferred over direct immersion sensors. The thermowell includes a 1½", 16AMP cap feature for easy installation using industry standard gaskets and clamps. The spring loaded RTD probe can be removed from the thermowell without exposing the system to ambient conditions for calibration or replacement. This sensor is also supplied with a white polypropylene screw-cap style connection head with 3/4"NPT conduit connection standard, Stainless steel screw-cap heads, and a flip top style white polypropylene head are also available.

Sensor Specifications Include:

316L stainless steel process wetted surfaces with surface finishes of 32 microinches or better.

Immersion lengths of 1⁵⁄8, 2½", 4½", 7½, and 10½" are available from stock, with others available.

Sensor Output is a 4-wire, 100 ohm, Class A, Platinum RTD meeting the requirements of IEC 60751.

These sensors can be used with 2-wire or 3-wire systems see information below.

Insulation resistance: 100 megohms minimum at 100 VDC.

Optional stainless steel connection heads available.

Food process hygienic temperature sensors can be used to aid food safety inspection compliance and verification of time temperature control. Combined with a chart recorder model CTXL you can temperature monitor a CCP ( Critical Control Point) or sanitation time and move toward a HACCP (Hazard Analysis Critical Control Point) compliance plan.

These sensors are supplied standard as 4-wire assemblies with two red wires and two white wires. When used in 3-wire applications, cut off one white wire making sure that it will not contact any terminals or metal surfaces (note: twisting the two white wires together will reduce the lead wire resistance on one side of the sensing element by half adversely affecting the accuracy of the reading). When used in 2-wire applications, cut off one white wire and one red wire (note: in 2-wire applications, twisting the two same-colored wires together at the terminals will not adversely affect your sensor accuracy since both wires will be affected by the reduction in resistance).

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PRS-3-100-A-TW-0163-D1-NB9W

£264.32

Availability: 7 weeks

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 1⁵⁄8" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0250-D1-NB9W

£287.64

Availability: 7 weeks

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 2½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0450-D1-NB9W

£307.51

Availability: 7 weeks

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 4½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-0750-D1-NB9W

£356.32

Availability: 7 weeks

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 7½" Immersion Length, with a White Polypropylene Screw-Cover Style Connection Head

PRS-3-100-A-TW-1050-D1-NB9W

£374.86

Availability: 7 weeks

4-Wire, Pt100 Class A RTD in a 316L Stainless Steel Thermowell with 1½", 16AMP Mounting Cap and 10½" Immersion Length, with a White Polypropylene Scew-Cap Style Connection Head

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR, GBP, or USD
Note: Please contact sales for other clamp sizes and styles, for other lengths, or for thermistor or thermocouple versions of this product.
Ordering Example: (1) PRS-3-100-A-TW-0450-D1-NB9W Removable Pt100 RTD Sensor with 1½, £307.51

Part Number Builder

Build Your Part Number Below

	(1)		(2)		(3)
PRS-3-		-A-TW-		-D1-

Option Descriptions:

(1) Nominal Element Resistance select from:
100 for 100 ohm @ 0 C (standard)
1000 for 1 kohm @ 0 C

(2) Insertion Length select from:
0163 for 1-5/8" insertion (2-1/2" well stem length)
0250 for 2-1/2" insertion (4" well stem length)
0450 for 4-1/2" insertion (6" well stem length)
0750 for 7-1/2" insertion (9" well stem length)
1050 for 10-1/2" insertion (12" well stem length)

(3) Protection Head select from:
NB9W for White Polypropylene Head with Screw Cap
NB15 for Large Stainless Steel Head
NB13 for Medium Stainless Steel Head
NB16W for White Polypropylene Head with Flip Top

Note: All combinations may not be valid, check spec sheet for valid part numbers.

Related Products:

PRS-TW-M12 Series Sanitary RTD Sensors