PX2670I - Discontinued

PX2670I

PLACE ORDER

0.4% Accuracy Improves Energy Management Systems
4-20 mA Output Is Compatible with Most 2-Wire Control Systems
Optional 3 1 /2 -Digit LCD Dispplay
IP65/NEMA-4 Enclosure
11-Point Calibration Certificate Standard

Description

OMEGAfs PX2670 Series pressure transducers sense either differential or gage pressure and convert this pressure to a highly accurate electrical signal. Used in building energy management systems, these transducers are capable of measuring pressures and flows with a high degree of accuracy to improve overall system efficiency. The units are temperature compensated to better than 0.33% FS/‹F over the range of 40 to 150‹F and have an IP65/NEMA-4 rated package to withstand environmental effects. A 31.2-digit LCD display is optional.

SPECIFICATIONS
Excitation: 24 Vdc nominal
Max: 30.0 + (0.004 x Loop Resistance .) Vdc
Min: 14.0 + (0.02 x Loop Resistance .) Vdc
Loop Resistance: 0 to 800 .
Output: 4-20 mA (2-wire) with internal zero and span adjustments
Accuracy: }0.4% FS at constant temperature (includes linearity, repeatability, and hysteresis)
Linearity: }0.33% FS
Hysteresis: 0.020% FS
Repeatability: 0.10% FS
Output Impedance: <100 .
Operable Temperature Range: 0 to 150‹F (-18 to 65‹C) Compensated Temperature Range: 40 to 150‹F (5 to 65‹C)
Thermal Span Effect: }0.033%FS/‹F
Sensor: Capacitance
Position Effects: Range Zero Offset (%FS/G) 0-10 inH2O .03 0-1 inH2O 1 0-0.1 inH2O 4
Maximum Line Pressure: 10 psi
Overpressure:
Negative Direction: 10 psi
Positive Direction: 10 psi
Wetted Parts: Air and non-conductive gas
Pressure Port: 3.16" OD tube fitting for 1.4" push-on tube
Electrical Connection: Internal Terminal Strip with Strain Relief
Weight: 11 oz (310 g)

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PX2670-0.1DI

Consult Sales

Availability:

very low differential transducer with a range from 0 to 0.1 in-H2O and a 4-20 mA output

PX2670-0.25DI

Consult Sales

Availability:

very low differential transducer with a range from 0 to 0.25 in-H2O and a 4-20 mA output

PX2670-0.5DI-M

Consult Sales

Availability:

very low differential transducer with a range from 0 to 0.5 in-H2O and a 4-20 mA output with an LCD Display

PX2670-0.5BDI

Consult Sales

Availability:

very low differential transducer with a bidirectional range of ±0.5 in-H2O and a 4-20 mA output

PX2670-0.5BDI-M

Consult Sales

Availability:

very low differential transducer with a bidirectional range of ±0.5 in-H2O and a 4-20 mA output with an LCD Display

† All amounts shown in EUR, GBP, or USD
Note: All models come with complete operator’s manual.

Part Number Builder

Build Your Part Number Below

	(1)		(2)
PX2670-		DI

Option Descriptions:

(1) Range (inH2O) select from:
0.1 for 0-0.1
0.25 for 0-0.25
0.5 for 0-0.5
1 for 0-1
2.5 for 0-2.5
5 for 0-5
10 for 0-10
25 for 0-25
0.1B for ±0.1
0.25B for ±0.25
0.5B for ±0.5
1B for ±1
2.5B for ±2.5
5B for ±5

(2) Display select from:
for Leave Blank For No Display
-M for LCD Display

Note: All combinations may not be valid, check spec sheet for valid part numbers.