PX409S-I Series
Pressure Transmitters with Hygienic Fittings
-
High, 0.08%, Accuracy
-
Excellent Long Term Stability
-
Ruggedised, with Secondary Containment
-
316L SS Wetted Parts
-
Shock and Vibration Rated
-
High Overpressure Rating
-
Now Available with M12 Connector, Order Model PX459
-
Hygienic Pressure Transmitter with 4-20 mA Output
-
Gauge and Absolute Pressure to 600 psi
Pressure Transducers - View related products
Description
Click on this link if you need more information about Sanitary Sensors.
The PX409S Series hygienic pressure transmitters are made using our proven micromachined silicon process.
They are available with 1½ or 2 in hygienic fittings (Tri-Grip™) and are designed for long reliable service in pressure or level
CIP applications in food processing, beverage or bio/
pharmaceutical applications as well as industrial applications that
require a rugged, high accuracy pressure transmitter. The micro-machined
silicon sensor provides a very stable transducer with exceptional
high accuracy of 0.08% and a broad compensated range of -6.7
to 85°C. The modular construction
allows for fast delivery of most configurations and fittings.
SPECIFICATIONS
Accuracy: 0.08% Best Straight Line (Linearity, Hysteresis and Repeatability combined)
Operating Temperature Range: -15 to 115°C
Compensated Temperature Range: -6.7 to 85°C
Temperature Compensation: Zero and Span Combined
≥5psi: 1% over 55.6°C range
≤2.5 psi: 2% over 55.6°C range
Min Isolation Between Case and Output Terminations: 100 MΩ @ 50 Vdc
Pressure Cycles: 1 million, minimum
Long Term Stability (1-Year): ±0.1% FS typ.
Shock: 50 g, 11 ms half sine shock, (under test)
Vibration: ±20 g (under test)
Bandwidth: DC to 1 kHz typical
Response Time: <1 ms
Fill Fluid: NEOBEE M5 Food grade
CE Compliant: Meets industrial emissions and immunity standard IEC61326
Environmental Protection: IP65 or IP67 depending upon electrical termination
|
Pressure Rating: 1½ and 2 in Tri-Grip™ (Tri-Clamp® compatible) fitting: 600 psi using suitable clamp
Over Pressure: 4 x rated pressure to maximum rated flange pressure
Secondary Containment: 6 x rated pressure to a maximum of 2000 psi (not in clamp)
Wetted Parts: 316L SS
Weight: 285 gm (10 oz)
Zero Balance: ±0.5% FS typical, 1% max (For ranges ≤2.5 psi ±1% typ 2% max)
Span Setting: ±0.5% FS typical, 1% max (For ranges ≤2.5 psi, ±1% typ 2% max)
Calibrated in vertical position with fitting down
CURRENT OUTPUT
Output: 4 to 20 mA
Supply Voltage: 9 to 30 Vdc max loop res Ω = (Vs-9)x50 [9 to 20 Vdc above 105°C)]
ELECTRICAL CONNECTIONS
2 m cable: PX409S
2 m cable and conduit: PX409CS
Mini-Din Connector: PX419S
Twist Lock Connector: PX429S
M12 Connector: PX459S
|
Please use the "Part Number Builder" below to select the model and options required to meet your requirements.
† All amounts shown in EUR, GBP, or USD
Ordering Example: (1) PX409S15-001GI Hygienic pressure transmitter with 1½ Tri-Grip™ fitting, 0-1 psig pressure range, 4-20 mA output and 2 m cable termination,, £879.72
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Electrical Termination select from:PX409S for 2 m (6 ft) cable
PX409CS for conduit/cable
PX419S for mini DIN
PX429S for Twist-Lock connector
PX459S for M12 Connector
(2)
Process Fitting select from:15 for 1.5 inch Tri-Grip
20 for 2 inch Tri-Grip (500 psi max)
(3)
Range select from:10W for 0 to 10 in H2O
001 for 0 to 1 psi
2.5 for 0 to 2.5 psi
005 for 0 to 5 psi
015 for 0 to 15 psi
030 for 0 to 30 psi
050 for 0 to 50 psi
100 for 0 to 100 psi
150 for 0 to 150 psi
250 for 0 to 250 psi
500 for 0 to 500 psi
600 for 0 to 600 psi (1-1/2 Clamp only)
(4)
Pressure Type select from:G for gauge pressure
A for absolute pressure (5 to 600 psia)
(5)
Output Type select from:V for 10 mV/V
5V for 0 to 5 Vdc
10V for 0 to 10 Vdc
I for 4 to 20 mA
Note: All combinations may not be valid, check spec sheet for valid part numbers.
CLOSE
