Submersible Pressure Transducer for Level and Depth Measurement

PX78-MV

submersible pressure transmitter

PLACE ORDER

All Stainless Steel Construction
Hermetically Sealed Housing
Screw on Protective Cap Included
15 metre Vented Cable Standard
Works with Optional In-Line Amplifiers
NIST Calibration Certificate

Level Switches and Transmitters - View related products

Description

OMEGA’s PX78 Series pressure transducer is a fully submersible transducer designed for liquid level and depth measurement. Its all stainless steel hermetically sealed housing makes it suitable for immersion in most industrial liquids and oils. A standard 15 metre vented cable (longer lengths available) provides an atmospheric pressure reference. The PX78 with a 5000 ohm bridge is designed to work with the DMD-16 and DMD-17 in line amplifiers for long distance transmission of the signal.

SPECIFICATIONS
Excitation: 10 Vac/Vdc (15 V max)
Output: 3 mV/V nominal 2.5 mV/V ≤5 psig
Zero Balance: ±2% FSO
Input Resistance: 5000 Ω min
Output resistance: 5000 ±50 Ω
Accuracy: 0.5% FS includes linearity, hysteresis and repeatability combined
Operating Temp Range: -29 to 93°C (-20 to 200°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Span Error: 0.003% rdg/°F
Zero Error: 0.005% FSO/°F
Proof Pressure: 150% of rated pressure
Burst Pressure: 300% of rated pressure
Wetted Parts: 316 stainless steel diaphragm and 17-4 PH stainless steel housing
Pressure Port: Nose protector included
Electrical Connection: 15 m (50') shielded and vented PVC cable
Notice: OMEGA does not offer a warranty on this product, its use, or application. It is the end user’s responsibility to assure proper installation and use of this transducer.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

PX78U7-004GV

Consult Sales

Availability:

4 psi transducer with the standard 15m cable

PX78U7-005GV

Consult Sales

Availability:

5 psi transducer with the standard 15m cable

PX78U7-010GV

Consult Sales

Availability:

10 psi transducer with the standard 15m cable

PX78U7-015GV

Consult Sales

Availability:

15 psi transducer with the standard 15m cable

† All amounts shown in EUR, GBP, or USD
Note: OMEGA does not offer a warranty on this product, its use or application. It is the end user’s responsibility to assure proper installation and use of this transducer.
Standard cable length is 15 metres, contact our sales department to order non-standard lengths.

Part Number Builder

Build Your Part Number Below

	(1)		(2)
PX78U7-		GV

Option Descriptions:

(1) Range (psig) select from:
004 for 0-4
005 for 0-5
010 for 0-10
015 for 0-15
030 for 0-30
050 for 0-50
100 for 0-100
250 for 0-250
500 for 0-500

(2) Extra Cable select from:
for Leave Blank for standard 50' of cable
-xxxFT for xxx' of extra cable (call to order)

Note: All combinations may not be valid, check spec sheet for valid part numbers.