† All amounts shown in EUR, GBP, or USD
Note: 0-160 mBar and 0-400 mBar ranges are available on models with amplified outputs only.
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Pressure Fitting select from:MA for G 1/8 male
MB for G 1/8 female
MC for G 1/4 male
MD for G 1/4 female
(2)
Electrical Termination select from:0 for 3 meter cable
1 for PT1H-10-6P connector (mating connector sold separately)
5 for Lightening protected amplifier box (4-20 ma only)
6 for micro DIN connector (no shunt cal)
(3)
Pressure Range select from:160M for 0-160 mBar
400M for 0-400 mBar
001 for 0-1 Bar
1.60 for 0-1.6 Bar
2.50 for 0-2.5 Bar
004 for 0-4 Bar
006 for 0-6 Bar
010 for 0-10 Bar
016 for 0-16 Bar
025 for 0-25 Bar
040 for 0-40 Bar
060 for 0-60 Bar
100 for 0-100 Bar
160 for 0-160 Bar
250 for 0-250 Bar
400 for 0-400 Bar
(4)
Units select from:A for Absolute Pressure
G for Gauge Pressure
S for Sealed Gauge Pressure
(5)
Output select from:V for mV/V Output
5E for Isolated 0-5 Volt Output
10E for 0-10 Volt Output
I for 4-20 mA Output
Note: All combinations may not be valid, check spec sheet for valid part numbers.