Resistance Wire and Heat-Curing Adhesive for Transducer Strain Gages

Resistance Wire

RESISTANCE WIRE FOR TEMPERATURE COMPENSATION AND ZERO BALANCE
TT300 HEAT-CURING ADHESIVE

Strain Gages, Accessories and Instrumentation - View related products

Description

TT300 cement is a heat-curing, two-component, epoxy resin adhesive which is used to bond polyimide-backed strain gages for strain measurement in temperatures up to 200°C (392°F). The adhesive can also be used to bond epoxy- backed gages, but the maximum operating temperature is then limited to 150°C (302°F).

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

SGB-36

£106.61

Availability: 8 weeks

36 gage Balco wire (500 ft) for zero and span temperature compensation, 19.7 Ohms/ft, temp. coefficient 0.45%/°C

SGC-36

Consult Sales

Availability:

36 gage Copper wire (1500 ft) for zero and span temperature compensation, 0.415 Ohms/ft, temp. coefficient 0.39%/°C

SGM-36

£37.56

Availability: 10 weeks

36 gage Manganin wire (200 ft) for zero balance, 15.2 Ohms/ft, temp. coefficient 0.002%/°C

TT300

Consult Sales

Availability:

Heat curing, two component adhesive kit for strain gage measurements up to 200°C (392°F)

† All amounts shown in EUR, GBP, or USD
Note: TT300 KIT INCLUDES:
(2) 1 oz. resin bottles ( 1 /2 filled)
(2) 1 oz. hardener bottles ( 1 /2 filled)
(2) plastic funnels (35 mm diameter)
(2) brush caps
(1) 2 oz. bottle of acetone
(1) 2 oz. bottle of acid primer
(1) 2 oz. bottle of neutralizer
(1) 2 oz. bottle of resin solvent
(1) manual