Parallel Pneumatic Grippers Miniature Series

RPM Series - Mini Parallel 2-Jaw Gripper

^£519.81 RPM-1M

PLACE ORDER

Pneumatic Parallel Mini Gripper Available in 3 Stroke Lengths
Precision Gripper-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
Gripper Accuracy of 0.05 mm (0.002") and Repeatability of 0.03 mm (0.001")
Rated Grip Force @ 7 Bar (100 psi), 36 N (8 lbs)
Compact Design for Gripping Small Parts in Small Places
Rigid and Low Friction Design Allows for Longer Finger Lengths for Use on Delicate Parts
Group Multiple Grippers in Close Array Using Top Manifold Mounting Surface
Up to 5 Million Cycles in Typical Operation and 10 Million with Maintenance
Operating Temperature -35 to 80°C (-30 to 180°F)
System Requires 3 to 7 bar (40 to 100 psi) Dry Filtered (40 micron or Better) Air Supply
Requires 4-Way, 2 Position Valve and Regulator for Delicate Parts

Motion - View related products

Description

Find how a pneumatic gripper works on this link.

RPM Series Gripper is a miniature pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V" roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. RPM Pneumatic Grippers are top mounted and have air ports on the side or top for manifold mounting to keep the air line away from the gripper area. These grippers are available in stroke lengths from 3.2 to 6.3mm with a gripper force of 36 N (8 lbs).

Pneumatic linear motion components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device.

Specifications
Pneumatic Specifications
    Pressure Operating Range: 3 to 7 bar (40 to 100 psi)
    Cylinder Type: Double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C
    Viton® Seals (Optional): -30 to 120°C
Maintenance Specifications*
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

RPM-1M

£519.81

Availability: 14 weeks

Mini Parallel Pneumatic Gripper with 3.2 mm (0.13") Stroke

RPM-2M

£500.87

Availability: 14 weeks

Mini Parallel Pneumatic Gripper with 4.8 mm (0.19") Stroke

RPM-3M

£906.68

Availability: 2 weeks

Mini Parallel Pneumatic Gripper with 6.3 mm (0.25") Stroke

Accessories

SLKT-121

£51.43

Availability: 2 weeks

Standard seal repair kit

SLKT-142V

£61.22

Availability: 14 weeks

Top air port manifold seal kit (Viton® only)

OM-AIR-M22270403

£13.93

Availability: 2 weeks

Mini-swivel elbow air fitting, 3M thread and 4mm tubing barb

† All amounts shown in EUR, GBP, or USD