SEPHB Series
Heavy Duty Explosion Resistant Heating Blankets
£303.02
SEPHB-612-180-120-T3
-
Factory Mutual Hazardous Area Approval
-
Class I, Div 2, Groups A, B, C, and D; Class II, Div 2, Groups F and G
-
Integral Built-In High-Limit Thermal Cutout Prevents Temperature Runaway†
-
Optional Pressure Sensitive Adhesive Available
-
Moisture and Chemical Resistant
-
Maximum Exposure Temperature of 232°C (450°F)
-
APPLICATION
• Low-Temperature Ovens
• Process Vats and Dip Tanks
• Storage Tanks
• Hoppers, Dry Storage Bins, Coal Silos
• Conveyors
Flexible Heaters - View related products
† All amounts shown in EUR, GBP, or USD
Note: Article 501 of the NEC requires that the maximum sheath temperature of the heater shall not exceed 80 percent of the auto-ignition temperature of the surrounding atmosphere when heater is continuously energized.
Auto-Ignition Temperature: The minimum temperature required to initiate or cause selfsustained combustion of a solid, liquid or gas independently of the heating or heated element (see NFPA 325M, Fire Hazard Properties of Flammable Liquids, Gases and Volatile Solids).
Part Number Builder
Build Your Part Number Below
Option Descriptions:
(1)
Dimension select from:612 for 6 in x 12 in
624 for 6 in x 24 in
1212 for 12 in x 12 in
1224 for 12 in x 24 in
2424 for 24 in x 24 in
(2)
Watt select from:180 for 180 W
360 for 360 W
720 for 720 W
1440 for 1440 W
(3)
Volt select from:120 for 120 V
240 for 240V
(4)
High-Limit Thermostat Temperature Rating select from:T3 for 145°C (292°F)
T4A for 70°C (158°F)
Note: All combinations may not be valid, check spec sheet for valid part numbers.