SP-014-Series
Smart Analog Interface For Process Signals | Layer N
£126.53
SP-014-1
-
Up to 3x Current Loop (0-24mA) or
-
Up to 3x mV (0-1.0 VDC)
-
2x Digital I/O
-
Software configurable through SYNC configuration software
-
Modular M12 construction
-
OMEGA Smart Core enabled
-Data Logging
-Integrated Alarm and Control
-Plug and Play Device Detection
-Sensor health monitoring
IIoT & Wireless Systems - View related products
Description
The Layer N SP-014 Process Monitoring Smart Probe provides an easy way to integrate process signals to your Layer N Ecosystem. The SP-014 accepts standard process signals through its M12 5-pin connector and Layer N Smart Interfaces through its M12 8-pin connector. The optional M12.5-S- M-FM connector can be utilized to easily connect wire leads to your SP-014.
Each of the 3 process inputs may be independently configured as 0-24 mA or 0-1.0 VDC inputs.
Intuitive Configuration
Configure your Layer N Smart Probe using SYNC’s intuitive configuration interface.
Edge Control and Built in I/O
The Layer N SP-014 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-014 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.
Smart Core Enabled
Smart core is integral to all Layer N Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
Smart Interface Modularity
Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.
Your Data at a Glance with Layer N Cloud
Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.
Specifications
INPUT POWER
Voltage: 2.8 VDC - 3.3 VDC
DIO DIGITAL INPUTS
VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC
DIO DIGITAL OUTPUTS
2x Open Drain 100 mA max
VMAX= 30 VDC
ENVIRONMENTAL
Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated
MECHANICAL
Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs
GENERAL
Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks
M12 5-Pin Wiring
| Pin |
mA |
mV |
| Pin 1 |
3.3V Power |
|
| Pin 2 |
Input 0 |
Input 0 |
| Pin 3 |
GND |
|
| Pin 4 |
Input 1 |
Input 1 |
| Pin 5 |
Input 2 |
Input 2 |
M12 8-Pin Wiring
| Pin |
Name |
Function |
| Pin 1 |
DIO 0 |
Discrete I/O Signal 0 |
| Pin 2 |
INTR |
Interrupt Signal |
| Pin 3 |
SCL |
I2C Clock Signal |
| Pin 4 |
SDA |
I2C Data Signal |
| Pin 5 |
Shield |
Shield Ground |
| Pin 6 |
DIO 1 |
Discrete I/O Signal 1 |
| Pin 7 |
GND |
Power Ground |
| Pin 8 |
3.3VDC |
Power Supply |
Layer N SP-014
| Model Number |
Description |
| SP-014-1 |
Process Monitoring Smart Probe with discrete I/O |
Layer N Smart Interface
Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem
| Model Number |
Description |
| IF-001 |
USB Smart Interface |
| IF-002 |
RS485/Modbus Smart Interface |
Accessories
An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-014.
| Model Number |
Description |
| M12.5-S-M-FM |
M12 5-pin screw terminal adapter |
| M12.8-T-SPLIT |
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins |
| M12.8-S-M-FM |
M12-8 pin Straight Plug Field install connector with screw terminals |
| DM12CAB-8-1-RA |
1m (3.3’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-3-RA |
3m (9.8’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-5-RA |
5m (16.4’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-1 |
1m (3.3’) cable dual M12-8 straight connector |
| DM12CAB-8-3 |
3m (9.8’) cable dual M12-8 straight connector |
| DM12CAB-8-5 |
5m (16.4’) cable dual M12-8 straight connector |
CLOSE
