SP-016-Series
Smart Heat Flux Sensor with Digital I/O | Layer N
£137.55
SP-016-1
-
1x Heat Flux Thermopile including Thermocouple Temperature Compensation monitoring device
-
Standard 2x Digital I/O
-
Software configurable through SYNC configuration software
-
Modular M12 construction
-
OMEGA Smart Core enabled
-Data Logging
-Integrated Alarm and Control
-Plug and Play Device Detection
-Sensor health monitoring
IIoT & Wireless Systems - View related products
Description
The Layer N SP-016 Heat Flux Smart Probe provides an easy way to integrate your thermopile-based heat flux sensor to the Layer N Ecosystem. The SP-016 performs the necessary calculations to provide the heat flux measurement in W/m2. The SP-016 accepts heat flux sensors through its M12 4-pin connector and Layer N Smart Interfaces through its M12 8-pin connector. Omega offers an optional M12-S-M-FM connector to easily connect wire leads to your SP-016.
The SP-016 supports any single thermopile sensor input (mV/W/ m2) and temperature compensation input (thermocouple). Additionally, the SP-016-1 provides 2 open drain discrete inputs/outputs that may be used to detect external switch closures or control external alarms and control relays.
Intuitive Configuration
Easily configure your Layer N Smart Probe using SYNC’s intuitive configuration interface. Additionally, an integrated command line interface allows for quick serial setup of your Smart Probe and Smart Interface using standard terminal emulators.
Smart Interface Modularity
Customize your Layer N Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Layer N Cloud.
Smart Core Enabled
Layer N Smart Probes are integrated with an advanced suite of IIoT Smart Core features. These features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.
Your Data at a Glance with Layer N Cloud
Layer N Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.
Specifications
INPUT POWER
Voltage: 2.8 VDC - 3.3 VDC
DIO DIGITAL INPUTS
VinHighThreshold= 2.2 VMAX
VinLowThreshold= 0.3 VMIN
VinMAX= 30 VDC
DIO DIGITAL OUTPUTS
2x Open Drain 100 mA max
VMAX= 30 VDC
ENVIRONMENTAL
Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated
MECHANICAL
Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs
GENERAL
Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Layer N Cloud, and Modbus Networks
HEAT FLUX SENSOR VALUES
Refer to the User’s Documentation of your heat flux sensor for Sensitivity, Gain, and Offset values.Values are configurable on SYNC configuration software.
Thermocouple Types
| Type |
Range |
Accuracy |
| J |
-210℃ to 1200℃ |
0.4℃ |
| K |
-160℃ to 1372℃ |
0.4℃ |
| T |
-190℃ to 400℃ |
0.4℃ |
| E |
-200℃ to 1000℃ |
0.4℃ |
| N |
-100℃ to 1300℃ |
0.4℃ |
| R |
40℃ to 1788℃ |
0.5℃ |
| S |
100℃ to 1768℃ |
0.5℃ |
| B |
640℃ to 1820℃ |
0.5℃ |
| C |
0℃ to 2320℃ |
0.4℃ |
M12 5-Pin Wiring
| Pin |
TC TempCO |
| Pin 1 |
TC - |
| Pin 2 |
Thermopile + |
| Pin 3 |
Thermopile - |
| Pin 4 |
TC + |
M12 8-Pin Wiring
| Pin |
Name |
Function |
| Pin 1 |
DIO 0 |
Discrete I/O Signal 0 |
| Pin 2 |
INTR |
Interrupt Signal |
| Pin 3 |
SCL |
I2C Clock Signal |
| Pin 4 |
SDA |
I2C Data Signal |
| Pin 5 |
Shield |
Shield Ground |
| Pin 6 |
DIO 1 |
Discrete I/O Signal 1 |
| Pin 7 |
GND |
Power Ground |
| Pin 8 |
3.3VDD |
Power Supply |
Layer N SP-016
The SP-016 comes with two discrete inputs/outputs. The discrete I/O can be used for a myriad of application including driving relays, physical alarms, or sensing dry contact like door switches. The probe can be configured to act as an edge controller, generating local alarm and control signals based on sensor inputs.
| Model Number |
Description |
| SP-016-1 |
Temperature and RTD Smart Probe with discrete I/O |
Layer N Smart Interface
Layer N Smart Probes require a Layer N Smart Interface to operate and connect to your Layer N Ecosystem. There are both wired and wireless options.
| Model Number |
Description |
| IF-001 |
USB Smart Interface |
| IF-002 |
RS485/Modbus Smart Interface |
Accessories
An optional M12 4-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-016.
| Model Number |
Description |
| HFS-5 |
Economical heat flux sensor |
| M12-S-M-FM |
M12 4-pin screw terminal adapter |
| M12.8-T-SPLIT |
Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins |
| M12.8-S-M-FM |
M12-8 pin Straight Plug Field install connector with screw terminals |
| DM12CAB-8-1-RA |
1m (3.3’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-3-RA |
3m (9.8’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-5-RA |
5m (16.4’) cable dual M12-8 connector, right angle terminator |
| DM12CAB-8-1 |
1m (3.3’) cable dual M12-8 straight connector |
| DM12CAB-8-3 |
3m (9.8’) cable dual M12-8 straight connector |
| DM12CAB-8-5 |
5m (16.4’) cable dual M12-8 straight connector |
CLOSE
