Tank Immersion Heaters Over-the-Side Immersion Heaters

TAT1_TAT2

PLACE ORDER

Incoloy® 800 Steath Heating Element
Thermowell Standard
Lightweight and Portable
Easy Installation and Removal
NEMA 4 Electrical Enclosure
Single- or Three-Phase Wiring

Immersion Heaters - View related products

Description

Application
OMEGA™ Over-the-Side Immersion heaters are specifically designed for heating fluids in tanks. Depending on the tank shape, size, accessibility and working area inside the tank, choose a round or L shaped heater. Standard sheath materials are Incoloy® 800 and steel with all wetted parts made with compatible alloys.
Construction
Tubular heating elements are welded into a liquid-tight junction box. Power leads for the elements travel up through the riser pipe and are connected to a terminal block in a NEMA 4 housing. Unless otherwise specified, heaters are wired for three-phase from the factory but can easily be converted to single-phase.
A thermowell for a 9.5 mm (3/8") diameter bulb is standard to accommodate an optional thermostat. A thermostat can be field installed to mounting lugs located in the electrical enclosure. 102 mm (4") sludge legs keep the elements off the bottom of the tank and above any deposits that may accumulate there.

Model No.		Element Shape	A		B		KW	Approximate Net Weight
240V-3Ph	480V-3Ph	Element Shape	mm	inch	mm	inch	KW	kg	lb
TAT20001	TAT20002	Round	999	39⁵⁄₁₆	343	13¹⁄₂	3	8	17
TAT20003	TAT20004		1303	51⁵⁄₁₆	470	18¹⁄₂	6	9	20
TAT20005	TAT20006		1303	51⁵⁄₁₆	597	23¹⁄₂	9	10	22
TAT10001	TAT10002	Straight	999	39⁵⁄₁₆	575	22⁵⁄₈	3	7	15
TAT10003	TAT10004		1303	51⁵⁄₁₆	956	37⁵⁄₈	6	8	18
TAT10005	TAT10006		1303	51⁵⁄₁₆	1337	52⁵⁄₈	9	9	20
Ordering Example: TAT20001, 3 KW immersion heater, 240V-3 phase.

Model No.		Element Shape	A		B		KW	Approximate Net Weight
240V-3Ph	480V-3Ph	Element Shape	mm	inch	mm	inch	KW	kg	lb
TAT20007	TAT20008	Round	999	39⁵⁄₁₆	343	13¹⁄₂	3	8	17
TAT20009	TAT20010		1303	51⁵⁄₁₆	470	18¹⁄₂	6	9	20
TAT20011	TAT20012		1303	51⁵⁄₁₆	597	23¹⁄₂	9	10	22
TAT10007	TAT10008	Straight	999	39⁵⁄₁₆	575	22⁵⁄₈	3	7	15
TAT10009	TAT10010		1303	51⁵⁄₁₆	956	37⁵⁄₈	6	8	18
TAT10011	TAT10012		1303	51⁵⁄₁₆	1337	52⁵⁄₈	9	9	20
Ordering Example: TAT20007, 3 KW immersion heater, 240V-3 phase.

Model No.		Element Shape	A		B		KW	Approximate Net Weight
240V-3Ph	480V-3Ph	Element Shape	mm	inch	mm	inch	KW	kg	lb
TAT20013	TAT20014	Round	999	39⁵⁄₁₆	273	10³⁄₄	3	7	16
TAT20015	TAT20016		999	39⁵⁄₁₆	343	13¹⁄₂	6	8	17
TAT20017	TAT20018		999	39⁵⁄₁₆	406	16	9	8	18
TAT20019	TAT20020		1303	51⁵⁄₁₆	470	18¹⁄₂	12	9	20
TAT20021	TAT20022		1303	51⁵⁄₁₆	540	21¹⁄₂	15	10	21
TAT20023	TAT20024		1303	51⁵⁄₁₆	597	23¹⁄₂	18	10	22
TAT10013	TAT10014	Straight	999	39⁵⁄₁₆	371	14⁵⁄₈	3	6	14
TAT10015	TAT10016		999	39⁵⁄₁₆	575	22⁵⁄₈	6	7	15
TAT10017	TAT10018		999	39⁵⁄₁₆	765	30¹⁄₈	9	7	16
TAT10019	TAT10020		1303	51⁵⁄₁₆	956	37⁵⁄₈	12	8	18
TAT10021	TAT10022		1303	51⁵⁄₁₆	1146	45¹⁄₈	15	9	19
TAT10023	TAT10024		1303	51⁵⁄₁₆	1337	52⁵⁄₈	18	9	20
Ordering Example: TAT20014, 3 KW immersion heater, 480V-3 phase.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

Typical Heating Applications: Lightweight Oils, Degreasing Solutions, Mineral Oil, Watt Density 3.6 watt/cm2 (23 watt/in2)

TAT20001

Consult Sales

Availability:

Round Shape Element 39 5/16 inches High x 13 1/2 inches Long, 3KW, 240V-3Ph

TAT10001

Consult Sales

Availability:

Straight Shape Element 39 5/16 inches High x 22 5/8 inches Long, 3KW, 240V-3Ph

Typical Heating Applications: Citric and Phosphoric Acid Solutions, Water Based Chemical Solutions, Watt Density 3.6 watt/cm2 (23 watt/in2)

TAT10011

Consult Sales

Availability:

Straight Shape Element 51 5/16 inches High x 52 5/8 inches Long, 9KW, 240V-3Ph

Typical Heating Applications: Process Water, Mild Caustic Solutions (2% maximum), Clean Water, Watt Density 7.4 watt/cm2 (42 watt/in2)

TAT20001

Consult Sales

Availability:

Round Shape Element 51 5/16 inches High x 18 1/2 inches Long, 3KW, 240V-3Ph

Order By Part Number

Part Number

Qty

Part Number

Qty

† All amounts shown in EUR, GBP, or USD