Corrosion Resistant Over-the Side Immersion Heaters

TPR and TPF Series

^£1,539.00 TPR-101

PLACE ORDER

Fluoropolymer Coated Stainless Steel Elements
20 W/In2
1 to 8 kW
120, 240 and 480 Volt, Single Phase
Moisture Resistant Terminal Enclosure TPF--Flat Elements
Fluoropolymer Coated Stainless Steel Thinblade Elements
20 W/In2
3 to 10 kW
240 and 480 Volt, Three Phase
Moisture Resistant Terminal Enclosure

Immersion Heaters - View related products

Description

1. Corrosion Resistan- Thermoplastic fluoropolymer coated stainless steel sheath for long life in almost all types of corrosive solutions for operating temperatures up to 212°F. Pin hole free, durable coating, 100% tested at factory.

2.Overtemperature Shutoff- Standard on all units. A manual reset cutout will deactivate the heater in the event of an overtemperature condition (rated 25 amps up to 277 volts). A visual minimum level indication is also provided on the heater guard.

3. Low Profile - Single and three phrase heaters have flat profiles which permit maximum work area and minimum interference with plating process. Heater projects less than 2" away from the side of the tank.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

TPR-101

£1,539.00

Availability: 10 weeks

signgle phase, 1 kW, 120 Vac, A dim inch (cm) 13(33), B dim inch (cm) 6(15)

TPR-102

£1,523.92

Availability: 10 weeks

single phase, 1 kW, 240 Vac, A dim inch (cm) 13(33), B dim inch (cm) 6(15)

TPR-202

£1,508.00

Availability: 10 weeks

single phase, 2 kW, 240 Vac, A dim inch (cm) 21(53), B dim inch (cm) 12(30)

TPR-204

£1,508.00

Availability: 10 weeks

single phase, 2 kW, 480 Vac, A dim inch (cm) 21(53), B dim inch (cm) 12(30)

† All amounts shown in EUR, GBP, or USD
Note: To reivew heater certifications and listings please click on download under related links below.

Part Number Builder

Build Your Part Number Below

(1)	(2)	(3)

Option Descriptions:

(1) Single or 3 phase models select from:
TPR- for Single phase
TPF- for 3 Phase

(2) Wattage select from:
10 for 1 kW
20 for 2 kW
30 for 3 kW
40 for 4 kW
60 for 6 kW
80 for 8 kW
100 for 10 kW

(3) Voltage select from:
1 for 120 Vac
2 for 240 Vac
4 for 480 Vac

Note: All combinations may not be valid, check spec sheet for valid part numbers.