OMEGAFLEX™ Low Density Polyethylene Tubing

TYPE

^£38.80 TYPE-1418-100

PLACE ORDER

Specific Gravity: .921
Hardness: 50 Shore D
Tensile Strength, PSI: 1600

Pumps & Mixers - View related products

Description

Polyethylene tubing is not to be used with barbed fittings due to its tendency to form stress cracks. Use compression-type fittings instead.

Specifications
Specific Gravity: .921
Tensile Strength, psi: 1600 Hardness: 50 Shore D
Elongation at Break, %: 500
Brittle Temperature: -60°C (–76°F)
Maximum Operating Temperature: 60°C (140°F)

Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
Note: The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

TYPE-14170-500

£84.57

Availability: 2 weeks

1/4 OD (in), 0.17 ID (in)

TYPE-1418-500

£152.52

Availability: 20 weeks

1/4 OD (in), 1/8 ID (in)

TYPE-516316-500

£152.03

Availability: 20 weeks

5/16 OD (in), 3/16 ID (in)

TYPE-516316-100

£36.92

Availability: 8 weeks

5/16 OD (in), 3/16 ID (in)

TYPE-3814-100

£50.22

Availability: 5 weeks

3/8 OD (in), 1/4 ID (in)

TYPE-1238-100

£57.07

Availability: 2 weeks

1/2 OD (in), 3/8 ID (in)

TYPE-1238-500

£230.24

Availability: 2 weeks

1/2 OD (in), 3/8 ID (in)

TYPE-5812-100

£58.21

Availability: 8 weeks

5/8 OD (in), 1/2 ID (in)

TYPE-3458-100

£58.21

Availability: 8 weeks

3/4 OD (in), 5/8 ID (in)

TYPE-7858-100

£94.78

Availability: 8 weeks

7/8 OD (in), 5/8 ID (in)

TYPE-134-100

£149.41

Availability: 8 weeks

1 OD (in), 3/4 ID (in)

TYPE-178-100

£77.01

Availability: 8 weeks

1 OD (in), 7/8 ID (in)

TYPE-1141-100

£152.03

Availability: 8 weeks

1 1/4 OD (in), 1 ID (in)

TYPE-134112-50

£404.06

Availability: 20 weeks

1 3/4 OD (in), 1 1/2 ID (in)

TYPE-1418-100

£38.80

Availability: 8 weeks

1/4 OD (in), 1/8 ID (in)

† All amounts shown in EUR, GBP, or USD
Note: Specifications shown are typical and are meant only as a guide. Field testing is recommended to find actual values in the given application.
The listed working pressures are based on a short-term burst using a 4-to-1 safety factor.
Ordering Example: (1) TYPE-14170-500 1/4 OD (in), 0.17 ID (in) tubing, £84.57