Weather Resistant Wireless pH/Temperature Transmitter

UWPH-2A-NEMA-M12 Series

^£557.84 UWPH-2A-NEMA-M12

PLACE ORDER

Weather Resistant NEMA 4X (IP65) Enclosure
0 to 14 pH and 0 to 100°C (32 to 212°F) Ranges
Transmit Data in Real- Time, Up to 120 m (400')
Low Power Operation and Sleep Mode
Works with UWTC-REC Receivers for a Complete Wireless System

Wireless Sensors, Transmitters, Receivers, Meters & Controllers - View related products

Description

OMEGA’s new wireless pH/temperature transmitter features a high performance microprocessor based wireless radio transmitter built into a NEMA enclosure. Compatible with most pH probes with a BNC connector, the UWPH provides fast, accurate readings. For automatic temperature compensation, the UWPH accepts a Pt100 RTD probe through a standard M12 connector. Configured through a standard USB port, the wall mountable UWPH can transmit data at rates from every 2 seconds to every 2 minutes. Each transmitted reading includes the pH and temperature data, along with RF signal strength and battery condition to the host. Using the standard software (included with each compatible receiver), this data can be displayed on screen in real time. The software allows the user to use your PC as a meter, chart recorder or data logger, so data can be saved, or exported to a spreadsheet file.

Specifications
Input Range: 0 to 14 pH
Accuracy: ±0.1 pH
Resolution: 0.01 pH, 0.1°C (0.1°F)
Response Time: 2 sec maximum
Input Connection: BNC
Temperature Compensation: Automatic, 0 to 100°C (32 to 212°F)
RTD Temperature Input:
    Input Type: Pt100 Ω, 0.00385 curve
    Range: 0 to 100°C (32 to 212°F)
    Accuracy: ±1°C (1.8°F)
    Resolution: 0.1°
Input Connection: M12 4-pin male connector
Transmit Sample Rate: Programmable from 2 seconds to 2 minutes
Radio Frequency (RF) Transceiver Carrier: ISM 2.4 GHz, direct sequence spread spectrum
RF Output Power: 10 dBm (10 mW)
Range of RF Link:
    Outdoor Line of Sight: Up to 120 m (400')
    Indoor/Urban: Up to 40 m (130')
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Power: One 3.0V, lithium “C” cell battery (included)
Battery Life (Typical): 3 years; 1 sample/minute reading rate @ 25°C
Enclosure: NEMA-4X polycarbonate
Enclosure Dimensions: 148.5 L x 94.7 W 50.8 mm H (5.74 x 3.73 x 2")
Note: pH and RTD probes sold separately

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

UWPH-2A-NEMA-M12

£557.84

Availability: 8 weeks

Wireless pH/temperature transmitter with NEMA enclosure

UWTC-REC1

£388.48

Availability: 2 weeks

USB-powered 48-channel transmitter receiver

Accessories

BATT-C-3.6V

£32.87

Availability: 2 weeks

Replacement battery, C cell 3.6V lithium.

UWTC-CABLE

£14.80

Availability: In Stock

Spare USB programming/communication cable

PHE-1311

£72.86

Availability: In Stock

Gel-filled pH electrode, general purpose

PRTF-10-2-100-1/8-6-E

Consult Sales

Availability:

100 Ohm, Class B DIN Platinum Thin Film RTD with a 1/8" diameter by 6" long probe and 40" of 3-wire PFA insulated and jacketed cable

PHA-4

£13.58

Availability: 2 weeks

4.00 pH buffer solution 500 mL (1 pint) bottle

PHA-7

£13.58

Availability: In Stock

7.00 pH buffer solution 500 mL (1 pint) bottle

PHA-10

£13.58

Availability: In Stock

10.00 pH buffer solution 500 mL (1 pint) bottle

† All amounts shown in EUR, GBP, or USD
Note: Comes complete with an antenna, one 3.0V lithium “C” cell battery, M12 mating connector for RTD input, and operator’s manual. UWTC-REC2 units also include DC power adaptor. Please see PDF for additional receivers and accessories.

Note: pH and RTD probes sold separately. To use without an RTD probe, a 110 ohm resistor must be connected to the RTD input. This will set the temperature input to a fixed value (about 26ºC).

Ordering Example: (1) PHE-1311 Gel-filled pH electrode, general purpose, £72.86 plus (1) UWPH-2A-NEMA-M12 Wireless pH/temperature transmitter with NEMA enclosure, £557.84 plus (1) UWTC-REC1 USB-powered 48-channel transmitter receiver, £388.48, £72.86 + 557.84 + 388.48 = £1,019.18