Multiconductor Feedthroughs For High Temperature Sealing

MFT Series

^£33.30 FTN-1

PLACE ORDER

Pressure or Vacuum Applications
Seals Multiple Thermocouples
Seals Multiple Protection Tubes
NPT Mounting Thread
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included at No Extra Charge
3 to 16 Probes
416SS Body and Cap
316SS Ferrules Standard
PFA Ferrules Available
Uses Standard OMEGALOK ® Ferrules
.040 Through 1 /4 " Diameter Probes
Blank Sealing Plugs Included at No Extra Charge

Thermocouple Connectors and Panel Systems - View related products

Description

These all new multiconductor feedthroughs are designed for use in applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy duty 416 stainless steel construction allows this fitting to be used in high pressure or vacuum applications. Probes between 0.040" and 0.250" can be used with these feedthoughs. The maximum number of robes per feedthrough is 3 for 1/4" diameter probes, 5 or 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter and 16 or 0.040" diameter.

All multiconductor feedthroughs are supplied in standard form with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If it is required that the probes be installed several times at different depths in the feedthrough, PFA ferrules should be used. PFA ferrules will not deform the probe sheath, allowing the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK™ compression fittings.

Place Order(Specify Model Number)

Part Number/ Desc.

Qty

Description

MFT-116-8

£158.75

Availability: 5 weeks

Accepts 8 Probes with a Diameter of 1/16", 1/2" NPT Thread

MFT-18-3

£102.44

Availability: 5 weeks

Accepts 3 Probes with a Diameter of 1/8", 1/2" NPT Thread

MFT-18-4

£105.63

Availability: 5 weeks

Accepts 4 Probes with a Diameter of 1/8", 1/2" NPT Thread

MFT-18-6

£121.51

Availability: 5 weeks

Accepts 6 Probes with a Diameter of 1/8", 3/4" NPT Thread

MFT-18-8

£129.44

Availability: 5 weeks

Accepts 8 Probes with a Diameter of 1/8", 3/4" NPT Thread

MFT-316-3

£100.75

Availability: 5 weeks

Accepts 3 Probes with a Diameter of 3/16", 1/2" NPT Thread

MFT-316-5

£114.40

Availability: 2 weeks

Accepts 5 Probes with a Diameter of 3/16", 3/4" NPT Thread

MFT-14-3

£100.74

Availability: 5 weeks

Accepts 3 Probes with a Diameter of 1/4", 3/4" NPT Thread

T-FER-040

£53.36

Availability: 5 weeks

PFA Ferrule, 0.040" Diameter

T-FER-1/16

£136.83

Availability: 2 weeks

PFA Ferrule, 1/16" Diameter

T-FER-1/8

£91.59

Availability: 2 weeks

PFA Ferrule, 1/8" Diameter

T-FER-3/16

£91.59

Availability: 2 weeks

PFA Ferrule, 3/16" Diameter

T-FER-1/4

£91.59

Availability: 2 weeks

PFA Ferrule, 1/4" Diameter

SS-FER-040

£39.95

Availability: 5 weeks

316 Stainless Steel Ferrule, 0.040" Diameter

SS-FER-1/16

£97.52

Availability: 2 weeks

Stainless Steel Ferrule, 1/16" Diameter

SS-FER-1/8

£57.12

Availability: 2 weeks

Stainless Steel Ferrule, 1/8" Diameter

SS-FER-3/16

£56.63

Availability: 5 weeks

Stainless Steel Ferrule, 3/16" Diameter

SS-FER-1/4

£53.62

Availability: 2 weeks

Stainless Steel Ferrule, 1/4" Diameter

FTN-1

£33.30

Availability: 2 weeks

3/4" NPT Male Feedthrough Cap

FTN-1-12

£33.30

Availability: 2 weeks

1/2" NPT Male Feedthrough Cap

FTN-1-14

£33.30

Availability: 2 weeks

1/4" NPT Male Feedthrough Cap

† All amounts shown in EUR, GBP, or USD
Note: All fittings are supplied with stainless steel ferrules. If PFA ferrules are required, add suffix "-PFA" to the model number shown. Add $1 to the cost per PFA ferrule. One ferrule needed for each conductor. PFA tape should be used on all pipe joints to provide a good seal and to prevent the threaded parts from seizing each other on disassembly.

Part Number Builder

Build Your Part Number Below

	(1)	(2)
MFT-

Option Descriptions:

(1) Diameter of Probe in Inches select from:
040 for for 0.040 Inch
116 for for 1/16 Inch
18 for for 1/8 Inch
316 for for 3/16 Inch
14 for for 1/4 Inch

(2) Number of Probes select from:
-3 for for 3 Probes
-5 for for 5 Probes
-6 for for 6 Probes
-8 for for 8 Probes
-10 for for 10 Probes
-12 for for 12 Probes
-16 for for 16 Probes

Note: All combinations may not be valid, check spec sheet for valid part numbers.