BRIDGE INPUT
Full Range: -7.6 to +7.6 mv\V; -38 to +38 mV @ 5V excitation
Type: Four Wire Ratiometric
Drift: < ± 0.05 %
Linearity: ± 0.01 %
Update Rate: Selectable, 10 or 80 SPS (Samples per second)
BRIDGE EXCITATION
Voltage: 5 Volts DC ± 0.1 V @ 59 mA
Bridge Impedance: Total 85 to 10000 Ω (operates with four 350 Ω load cells in parallel)
TARE INPUT
Type: Remote volt free contact, up to 10 metres distance
OUTPUT CURRENT
Current Source: Range 0 to 21.5 mA , Max Load 750 Ω
Current Sink: Range 0 to 21.5 mA , Supply 10 to 30 V dc, Voltage effect 0.2 uA/V
Accuracy: (mA Out/ 2000) or 5 uA which ever is the greater, Drift 1 uA/°C
OUTPUT VOLTAGE
Range: 0 to 10.1 V or -10.1 to 10.1 V, Accuracy ± 5 mV
Current Drive: ± 2 mA, Min load 5000 Ω @ 10 V
PUSH BUTTON CONFIGURATION
Type: Independent “low” “High” front panel push buttons allow user to manually set low and high output points.
SUPPLY
Range: 10 to 48 VDC, 10 to 32 VAC Protected by internal 500 mA resettable fuse.
Power: < 1 W Full Power
GENERAL
Isolation: Supply to input to output 500 V dc.
Indication: LED, Green when output -0.1 to 100.1 %, else red |
USER INTERFACE
Type: USB 2.0
Baud rate: 19,200 baud
Equipment: PC running windows XP or later, USB cable.
USER INTERFACE FUNCTIONS
Calibration Scaling: 2 to 6 points signal against process
Filter: 1 to 20 Seconds to reach 70 % of final value
Tare: Remote set tare offset with programmable user set point.
Active Calibration: Active Calibration against live load cell
Process Units: 4 Characters
Tag Number: 20 Characters
Process Output: Process Output Range
Signal Output: Select type, signal range
Active scaling output: Set output process range against active sensor input
Sensor Information: Model, sensitivity and balance
ENVIRONMENT
Operating Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Storage Ambient: -30 to +70 °C ; 10 to 90 %RH (non condensing)
Configuration Ambient: 10 to 30 °C
Installation Enclosure: DIN Rail enclosure offering Protection >= IP65.
APPROVALS
CE: BS EN 61326
MECHANICAL
Style: DIN 43880, Colour grey, material Polyimide 6.6
Weight: < 70 grams
Dimensions: 90 mm H x 15.5 mm W x 56.4 mm D
Terminals: 2.5 mm Maximum |
CLOSE
