Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Weather Resistant Wireless Process Transmitter
Voltage/Current Transmitter

UWPC-2A-NEMA-M12 Series

Weather Resistant Wireless Process Transmitter Voltage/Current Transmitter | UWPC-2A-NEMA-M12 Series

£557.84 UWPC-2A-NEMA-M12

CE
  • Convert Process Signal to Wireless—Up to 120 m (400')
  • Accepts 0 to 1V, 0 to 5V, 0 to 10V and 4 to 20 mA Signals
  • Weather Resistant NEMA 4X (IP65) Enclosure
  • Low Power Operation/ Sleep Mode for Long Battery Life
  • UWTC Receivers Work with Up to 48 Wireless Transmitters
  • Transmit Temperature Data Wirelessly to a PC or the Internet
  • User Selectable Input Ranges
Wireless Sensors, Transmitters, Receivers, Meters & Controllers - View related products

Description

The new UWPC wireless process transmitter converts standard process signals (0 to 1V, 0 to 5V,
0 to 10V and 4 to 20 mA) into a wireless signal that can be transmitted up to 120 m (400'), eliminating the need for wiring runs in a variety of environments. The wall mountable UWPC transmits data at preset intervals, selectable from 2 to 120 seconds. Transmitted data includes the sensor reading, along with RF signal strength and battery status. The UWPC is compatible with the UWTC-REC family of wireless receivers, which can accept signals from up to 48 wireless transmitters, and display them on a PC. Each compatible receiver includes free software that converts your PC into a monitor, chart recorder or data logger. Readings can be saved and later printed or exported to a spreadsheet file.

Specifications
Input Range: 0 to 1 Vdc, 0 to 5 Vdc, 0 to 10 Vdc or 4 to 20 mA
Accuracy: ±0.04% of range
Input Connection: M12 connector
Transmit Sample Rate: Programmable from 1 sample/2 sec to 1 sample/120 sec
Radio Frequency (RF) Transceiver Carrier: ISM 2.4 GHz, direct sequence spread spectrum
RF Output Power: 10 dBm (10 mW)
Range of RF Link:
    Outdoor Line of Sight: Up to 120 m (400')
    Indoor/Urban: Up to 40 m (130’)
RF Data Packet Standard: IEEE 802.15.4, open communication architecture
Power: One 3.6V, lithium “C” cell battery (included)
Battery Life (Typical): 3 years 1 sample/minute reading rate @ 25°C (77°F)
Enclosure: NEMA 4 (IP65), polycarbonate
Enclosure Dimensions: 145.8 L x 94.7 W x 50.8 mm H (5.74 x 3.73 x 2")
Resolution: 14-bit, up to 4 decimals
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
UWPC-2A-NEMA-M12
£557.84
Availability: 8 weeks
 
Wireless process input transmitter with NEMA enclosure
UWTC-REC1
£388.48
Availability: 2 weeks
 
USB powered 48-channel transmitter receiver
BATT-C-3.6V
£32.87
Availability: 2 weeks
 
Replacement battery, C cell 3.6V lithium
All amounts shown in EUR, GBP, or USD
Note: Comes complete with antenna, 3.6V lithium “C” cell battery, and operator’s manual. Note: Because of transmission frequency regulations, these products may only be used in the United States, Canada and Europe (please note CE compliance of the specific model for use in Europe). Please see PDF for additional receivers and accessories.
Ordering Example: (1) UWPC-2A-NEMA-M12 Wireless process input transmitter with NEMA enclosure, £557.84  plus (1) UWTC-REC1 USB powered 48-channel transmitter receiver, £388.48, £557.84 + 388.48 = £946.32
We noticed you are from the US. Visit your local site for regional offers and live support.