Cookies on the OMEGA websites
We use cookies on this website, these cookies are essential for the website to work correctly.If you continue without changing your settings, we'll assume that you are happy to receive all cookies on this website.To find out more information about these cookies please click here.
CLOSE
Basket  |  Contact  |  Help  | 
Free Phone 0800 488 488
International+44(0) 161 777 6611
Layer N Banner

Humidity/Temperature Transmitter

HX400 Series

Humidity/Temperature Transmitter | HX400 Series

Humidity/Temperature Transmitter

CE
  • 4 to 20 mA for Both RH and Temperature
  • Two Points Field Calibration
  • Models with Built-In Display Indicate Humidity and Temperature
  • Field Configurable Parameters
  • Two Isolated SSR Output
Relative Humidity Measurement Instruments - View related products

Description

The HX400 Series transmitters provide remote and on-site monitoring of relative humidity and temperature. Each parameter is transmitted as a 4 to 20 mA signal to remote receivers. The HX400 is a programmable 2-wire field mounted humidity/ temperature transmitter for use in environmental air monitoring and system. Its state-of the art design combines digital capacitor humidity/temperature chip and microprocessor-based linearization with temperature drift compensation technology offering proportional, linear, and highly accurate dual 4 to 20 mA output current in a variety of applications. The HX400 integrates functions of transmitter, indicator and alarm outputs in one unit. All directly measured and computed parameters are configured via front 3 pushbutton without personal computer involved. Dual 3-digit 7-segments LED display module indicates the values of the measured parameters in measuring mode or prompting the programming instructions during setup mode and calibration mode. The current output models enable placing of the transmitter at a remote location virtually any distance away from the measuring device. The HX400 models feature built-in dual displays that indicate both humidity and temperature simultaneously.

Specifications
Loop Power: 12 to 32 Vdc; dual 4 to 20 mA loop current; reverse polarity protected (Vloop = 24 Vdc, Tamb = 23 ±2°C, Rload = 250 Ω)
Dual Isolated Solid State Relay Output: For output #1 and output #2; 15 mA maximum, 40 Vdc maximum
Accuracy and Range of Output Current: ±0.02 mA; 4 to 20 mA (both channels)
Accuracy @ 23°C and Scaleable Measurement Range: Without field calibration
Relative Humidity (RH): ±2%; 10 to 90%
Temperature: ±0.5°C (0.9°F)
Dew Point: ±2°C (3.6°F)
Wet Bulb Temperature: ±2°C (3.6°F), -20 to 80°C (-4 to 176°F)
Repeatability of Relative Humidity and Temperature: ±1% RH, ±0.1°C
Display Resolution: 0.1% RH, 0.1°C (temperature < 100°C)
Response: 10 seconds (relative humidity); 30 seconds maximum (temperature)
Filtering Ability of Sensor Cap: Stainless steel wire mesh; 0.05 mm
Type of Fluid: Air and neutral gases
Configuration Operation: Front 3 pushbutton with dual high bright 3-digit LED module
Working Temperature:
    Electronics Device: -20 to 70°C (-4 to 158°F)
    Sensing Probe: -40 to 100°C (-40 to 212°F)
Dual Miniature Loop-Powered Indicators: Dual 3-digits LED (green for humidity; red for temperature)
Reading Rate: 1 update per second
Display Accuracy
    Relative Humidity: ±2% RH
    Temperature: ±0.5°C (1°F)
Display Resolution:
    Relative Humidity: 0.1% RH
    Temperature: 0.1°C (0.2°F)
Housing Material: POM (sensing probe); polycarbonate (electronics device)
Protection: NEMA 4 (IP65) (electronic device); IP40 (sensing probe)
Dimensions: 110 W x 80 L x 56 mm D (4.3 x 3.2 x 2.2")
Weight: 250 g (8.8 oz)
Probe Dimensions:
    Wall Mount Unit: L = 73 mm (2.87"), D = 15.5 mm (0.61")
    Remote Mount Unit: L = 100 mm (3.94"), D = 15.5 mm (0.61"), 100 cm (39.4") cable, 5.3 (0.21") diameter cable
    Duct Mount Unit: L = 200 mm (7.87"), D = 15.5 mm (0.61")
Place Order(Specify Model Number)
Part Number/ Desc.
Qty
Description
HX401W
£543.60
Availability: 2 weeks
 
Wall mount relative humidity transmitter
HX401R
£578.52
Availability: 11 weeks
 
Remote probe relative humidity transmitter
HX401D
£608.45
Availability: 11 weeks
 
Duct mount relative humidity transmitter
HX402W
£620.33
Availability: In Stock
 
Wall mount RH and temperature transmitter
HX402R
£688.24
Availability: 2 weeks
 
Remote probe RH and temperature transmitter
HX402D
£713.18
Availability: 11 weeks
 
Duct mount RH and temperature transmitter
All amounts shown in EUR, GBP, or USD
Note: Comes complete with operator’s manual.
Ordering Example: (1) HX401W Wall Mount Temperature & Humidity Transmitter, £543.60
We noticed you are from the US. Visit your local site for regional offers and live support.